DJI E-Port Development Kit

Transforms the aircraft E-Port into multiple standard hardware ports. Convenient for hardware equipment connection, SDK development and debugging.
General Description
The development kit can transform the aircraft E-Port into multiple standard hardware ports, such as XT30 power output ports, USB 2.0 port and UART/PPS signal port, making it convenient for developers to connect hardware equipment and perform SDK development and debugging.
Tips
1. When using the adapter board, be sure to place it in a proper position to prevent the contact between the board and the aircraft arm from short-circuiting.
2. If the adapter plate is integrated into a payload instrument, be sure to design a heat dissipation system and a metal shielding cover.
3. If you detect sparks, smoke, strange odors or other anomalies, immediately disconnect the adapter board from the power supply.
4. If all three XT30 power output ports are used at the same time, the total power output will be less than the aircraft's max. power output. Try to develop instruments that meet the power output specifications.
Package Contents
E-Port adapter plate × 1
Pin strip protector × 1
E-Port coaxial cable (150 mm) × 1
XT30 to USB-C power cable (300 mm) × 1
Power cable XT30 to DC5.5 (300 mm) × 1
Specifications
Adapter board dimensions: 55 × 40 × 9 mm (L × W × H)
Power output VCC XT30:
DJI Mavic 3E/3T: 12-17.6 V/4 A
Matrice 30 series: 19.2-26.1 V/4 A
Matrice 300 RTK: 24 V/4 A
Matrice 350 RTK: 24 V/4 A
Power output 12 V XT30: 12 V/2 A
Power output 5 V XT30: 5 V/2 A
Compatibility
Matrice 350 RTK
Matrice 300 RTK
Matrice 30/30T
DJI Mavic 3E/3T