11 - 20 of 39 results

New

FrSky X8R PCB antenna

Currently unavailable

Notify on availability
45.00
The price includes VAT
Delivery weight: 100 g

FrSky X8R PCB antenna

Description:
Brand:  FrSky
Item Name: FrSky X8R Telemetry Receiver
Dimension: 46.5 x 27 x 14.4mm (1.83" x 1.06" x .56")
Weight: 16.8g (.59 oz)
Operating Voltage Range: 4V-10.0V
Operating Current: 100mA@5V
Operating Range: >1.5km (Full Range)
RSSI output: analog voltage output (0~3.3V)
Firmware Upgradeable
Number of Channels: 16CH (1~8ch from conventional channel outputs, 1~16ch from SBUS port,or combine two X8R to become a 16 channels receiver)

Features:
Short antenna
Highly secure and robust link for long distances

Browse these categories as well: Remote Control, FrSky
New

FrSky 8ch FASST compatible receiver, with the ganged capability for a multi-channel receiver

In stock
can be shipped within 1 days

42.00
The price includes VAT
Delivery weight: 15 kg


FrSky 8ch FASST compatible receiver, with the ganged capability for a multi-channel receiver
 
FEATURES

1) Parallel with another TFR8/TFR8S to become a 14 channel FASST compatible receiver
2) Two selectable failsafe setting options (use native failsafe on radio side or set failsafe on TFR8S side)
3) Firmware upgradeable

SPECIFICATION
Compatibility
Air Systems (7CH Mode/Multi Mode) 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc.
Surface Systems (C1 Mode) 3PK, 4PK, etc.
Dimension

54*30*15mm

Weight

14.9g

Operating Voltage Range

3.5~10V

Number of Channels

8~14ch

 

Browse these categories as well: Remote Control, FrSky
New

FrSky Smart Port Current Sensor 150A S.port

In stock
can be shipped within 1 days

37.90
The price includes VAT
Delivery weight: 100 g


FrSky Smart Port Current Sensor 150A S.port

The FrSky Ampere Sensor (SP-150A) can measure Current (A) when connected between a Battery and ESC. This sensor requires a Smart Port enabled receiver like the X8R or other X series receivers.

Weight: 20g
Measurement range: 0~150A
Maximum safe current: 150A
Sensor current consumption: 35mA@5V
Operational Voltage: 4 - 10 VDC (from receiver)
Accuracy: 2% @ 25°C 

Easy installation, the coil slips over the positive lead before your speed control, note the direction of the arrow on the coil sensor, the arrow must face towards the speed control. Your Taranis must be bound to an X series receiver is D16 mode. Plug the sensor into your receiver Smart Port, and you are ready to use this sensor. You will then define how your Taranis uses this data. 

MANUAL

Browse this category: FrSky
New

FrSky GPS Sensor w/Smart Port

In stock
can be shipped within 1 days

36.00
The price includes VAT
Delivery weight: 15 kg


FrSky GPS V2 Sensor with SMARTPort

Details

FrSky GPS Sensor (V2) - feeds variable directional information such as: Altitude, position, speed, and UTC time etc., which is displayed in real time on FrSky Transmitter or telemetry dashboard (DHT-U/FLD-02/FSD etc.)  This sensor will only work with the FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.  This is a great addition to your Taranis setup.

Specifications

  • Mode: GPS sensor (V2) 
  • Interface: S.PORT 
  • Operational Voltage: DC 4 -10 V 
  • Weight: 11.3g
  • Current Draw: 80mA @5V 
  • Sensitivity: -160dBm
  • Operating Temperature Range: -40 to 85C
  • Date Rate: 1Hz 
  • Antenna: Built-in patch
  • Time to fix: 30s cold
  • Speed Accuracy: Approx 0.1m/s 
  • Position Accuracy: Approx 2.5m CEP
  • Dimensions: 40 x 20 x 9mm (L x W x H)
  • Operation Limits: Dynamics 4g /Altitude 50,000m /Velocity 500m/s
  • Compatibility: FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.

The GPS should be mounted with belcro in your model so that the "UP" side is facing toward the sky.

FrSky GPS Sensor (V2) - feeds variable directional information such as: Altitude, position, speed, and UTC time etc., which is displayed in real time on FrSky Transmitter or telemetry dashboard (DHT-U/FLD-02/FSD etc.)

 

Customers who bought this product also bought

Delivery weight: 50 g
*
The price includes VAT

Browse these categories as well: Remote Control, FrSky
New

Frsky Air Speed Sensor- ASS-70

In stock
can be shipped within 1 days

33.90
The price includes VAT
Delivery weight: 600 g


Frsky Air Speed Sensor- ASS-70

FrSky Smart Port Air Speed Sensor ASS-70 is designed for FrSky Smart Port enabled system, and can provide Airspeed Data for your entire flight.

 

Compatibility    

FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.

Model    

ASS-70

Dimension    

Circuit Board: Weight 7 g, dimensions 33.29×22.26×12.55mm

Pitot Tube: Weight 4 g, length 101mm, diameter 2.6 mm

Pitot Tube Hose: Silicon, clear, 3 feet (1 meter), 2.2mm ID, 3.8mm OD

Operating Voltage Range    : DC 4 -10 V

Operating Current: 20mA@5V

Measurement Range    :  0~270km/h  (0~167.7mile/h )

 


MANUAL

Browse these categories as well: Tx/Rx Systems & Parts, FrSky, 3drobotics / ProfiCNC/HEX
New

Frsky TFR6-TF Series (Futaba FASST Compatible)

Currently unavailable

Notify on availability
31.00
The price includes VAT
Delivery weight: 50 g

1.Introduction

    1.1 Compatibility:
  FASST 2.4G Air Systems (7CH Mode/Multi Mode): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc.
 
     1.2 Specifications:
   Number of Channels: 7
   Operating Voltage Range: 3.5V~10V
   Operating Temperature Range: -10℃~60℃
   Dimension: 37*22*8mm
   Weight: 7.8g
 
1.3 Features
   1) Lighter weight and physically smaller;
   2) Two selectable failsafe setting options.
2.Setup
    2.1 Bind procedure:
    Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. After the RED LED is off and GREEN LED is solid, the binding process is completed and the receiver is operating normally.
   2.2 Setting failsafe:
   TFR6 support two selectable failsafe setting options, either use native failsafe position preset on the transmitter side, or set failsafe on TFR6.
   2.2.1 Use native failsafe position preset on the transmitter side:
   If not disabling failsafe on the transmitter side, TFR6 will use native failsafe position preset on the transmitter side.
   2.2.2 Set failsafe on TFR6:
   TFR6 supports failsafe function for all channels. Follow the steps below to set failsafe on TFR6:
   1) Bind the receiver first, and disable failsafe on the transmitter side;
   2) Set all transmitter controls to the desired failsafe position;
   3) Press briefly the F/S button of the receiver, the GREEN LED of the receiver will flash twice, indicating the failsafe is set up successfully.
    If you do not need the failsafe function any more, just re-bind the receiver to set default failsafe mode.
   Hint: If not disabling failsafe on the transmitter side, TFR6 will use native failsafe position preset on the transmitter side.
   2.3 LED status:
RED LED GREEN LED Mode
Off On Normal mode
On On Waiting to be bound
Flashing On Signal lost
On Flashing twice Set failsafe

 

 

Browse this category: FrSky
New

FrSky - SBus Current/Ampere Sensor 40A

In stock
can be shipped within 1 days

29.90
The price includes VAT


FrSky - SBus Current/Ampere Sensor 40A

Compatibility

FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.

Model

FCS-40A

Dimension

61.2×16.7×13.2mm                  

Weight

17g

Operating Range

 0~40A          

  • Model: FCS40A-FAS-40-SPORT
Browse this category: FrSky

FrSky 4-Channel S.BUS to PWM Decoder

In stock
can be shipped within 1 days

29.90
The price includes VAT


FrSky 4-Channel S.BUS to PWM Decoder

The FrSky S.BUS to PWM Decoder allows you to use any standard analog or digital servos with your S.BUS compatible receiver. This eliminates the need for using pricey S.BUS specific servos allowing you to use your models existing servos.

Featuring 4 programmable channel outputs, you can independently assign each servo to a channel of your choice while only having to connect one input lead from your receiver. This makes your wiring much more tidy and allows for easy setting up of your servos without the need for running multiple extension leads.

This is a great device to use in conjunction with our Orange 7CH and 9CH S.BUS compatible receivers!

Includes:
FrSky S.BUS to PWM Decoder

Specs:
Channel Outputs: 4 programmable
Channel Ouput Lead Lengths: 200mm
Overall Length: 350mm

*Note: FrSky Servo Channel Changer required (sold separately, see related items below) to change assignment of channel outputs.

 

Browse this category: FrSky
New

FrSky - Replacemnt LCD Display for Taranis X9D PLUS

In stock
can be shipped within 1 days

27.90
The price includes VAT
Delivery weight: 50 g


FrSky - Replacemnt LCD Display for Taranis  X9D PLUS

Browse this category: FrSky
New

Frsky XM receiver EU version

In stock
can be shipped within 1 days

26.00
The price includes VAT


Frsky XM receiver EU version

The FrSky XM micro receiver is the smallest receiver on the market, weighing only 1g. It has 16 channels per Sbus

Micro receiver ideal for micro-sized drones and other RC models such as Indoor aircraft.

* Doesnt have telemetry.


Characteristics:

     Dimensions: 15 * 10 * 3.5mm
     Weight: 1g
     Number of channels: 16 channels per SBUS
     Working voltage: 3.5 ~ 10V
     Consumption: 20mA @ 5V
     Scope: 600 m
     RSSI output: Analog 0 ~ 3.3V
     Upgradeable firmware
     Compatibility: FrSky D16

Browse this category: FrSky
11 - 20 of 39 results