Graupner  Ultra DC quad charger 320W

Overview:
Graupner/SJ "ULTRA DC QUAD" is a computer-controlled four-port balancer charger that features a high-performance microprocessor. The advanced software allows you to charge four batteries of varying types and numbers of cells simultaneously.
The charger provides multiple charge programs and a balancer connection for up to 6 cells.

Age recommended by manufacturer: 14 years and up

Characteristics:

• Optimised operating software
• One display and one input keyboard per charger output
• Integrated balancer
• Balanced discharge
• Charge/discharge capability for LiPo/LiFe/LiIon, NiMH, NC, PB batteries
• Normal, fast and storage charge programs
• Automatic error detection and shut-off
• delta peak cut-off
• 10 x 4 programmable battery memories

The Set contains:

• ULTRA DC QUAD charger
• EH to XH 6S Adapter Board and 6S Cable x 4
• DC input cable
• Temp Sensor x 2
• charge Cable(R, BK)
• AlligatorClip(R, BK)
• Manual

Specification
Input voltage : External DC Power Supply 11-15 V
Discharge current : 4x(max.5W) 0,1 ... 1 A
All-up weight, approx.: 1012 g
Capacity: 4x 10 ... 9900 mAh
Dimensions (LxWxH): 225 x 170 x 40 mm
Socket type : DC Eingang XT-60
Charge current: 4 x (max.80 W) 0.1 ... 7 A
Operating voltage : DC: 11 ... 15 V
Balancer socket: 1-14 NiCd,NiMH/1-6 Lixx/1-6 Pb

G.T. Power X-Drive 607 Quad Balance Charger
320W (total) 80W per output

High-power and high-performance circuit

It features four totally independent power outputs. Each can charge up to 80 watts, total power output is 320 watts.
The X-Drive 607 can charge or discharge up to 4 x 15 cells of NiCd/NiMH or 4 x 6S Lithium batteries. Each output can charge up to 7A (depending upon cells/watts).

Individual (4) balancers are built in for use with Lithium batteries.
The Lithium cells are also balanced when discharging.
If the voltage of any one cell is outside of specificatio, the charging/discharging will be stopped for safety reasons with the error message.
Accept various types of Lithium battery.
Lithium battery 'Fast' and 'Storage' mode
'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage.

Maximum safety for NiCd/NiMh cells

The automatic charging program works on the principle of the Delta-peak voltage detection for NiCd/NiMH cells.
Auto-charge current limit: When charging NiCd or NiMH at 'AUTO' current mode, you can set the upper limit of change current to avoid from high current charging. This is very useful when charging the low impedance and small capacity NiMH battery in 'AUTO' mode.
Capacity limit: The changing capacity is calculated by multiple of the charging
current and time. If the charging capacity exceeds the limit the b attery the charging will be stopped when it reaches the previously user set value.
Temperature limit: The temperature of the battery on charging will rise by its internal chemical reaction.
If you set the limit of temperature the charging will stop when this user set limit is reached.
Processing time limit: you can also set the maximum charging/discharging.
Input power monitor: To protect the car battery you are using to power the charger.
Automatic cooling fan: The cooling fan operates automatically when the internal temperature of the charger is raised.

Data store/load

For users convenience it can store maximum 5 data of different batteries. You can
establish the data contains program setting of the battery to charge or discharge continually. These data can be called out at any time you need and the process can be executed without program setting.

Cyclic charging/discharging

Perform 1 to 5 cycles of charge/discharge or discharge/charge continually for battery refreshing and balancing. Not recomended for Lithium cells.

Features

• Capacity Limit
• Maximum safety
• Temperature monitoring
• Input power monitoring
• Easy to program buttons
• 5 battery memory
• Individual cell monitoring
• 2-Line Back lit LCD display
• Built in Balancer to 6S packs
• Cycle charging/discharging
• Includes "FAST" & "STORAGE" Li-xx programs

Product Details

• Output 320W. 80W per Output
• Discharge 20W. 5W per Output
• Balancing current 300mAh/cell
• Operating input voltage : 11 - 18V DC
• Ni-Cad / Ni-MH : 1 - 15 Cells per Output
• Li-Ion / Li-Po / Li-Fe : 1 - 6 Cells per Output
• Charge current : 0.1 - 7.0A per Output
• Discharging current: 0.1 - 1.0A per Output
• PB / Lead Acid : 2 - 20V
• 4x Built in Cell Ballancer : Up to 6S (series) Li-Po (JST-XH connectors)
• No. of Cycles : Up to 5 Cycles
• Weight : 995g
• Dimensions : 230mm x 158mm x 60mm

Includes:

1 x Charger
2 x Crocodile Clips to connect to car battery
1 x JST-XH balance boards
1 x TP/FP balance boards.
1 x Tamiya charge lead
1 x JST/BEC charge lead
1 x Futaba Rx charge lead
1 x Crocodile charge lead
1 x Bare end 18AWG charge leadle connector cable
1 x Manual

utput

Landing Gear for Phantom 1/ 2

Included:
1x Landing Gear for Both Phantom 1 and 2
(Please be noted that Phantom, Gimbal, Gopro are not included!)

 

Flight Case para phantom dji F 330

just flight case, no multirrotor

Carbon Fiber Tall Landing Skid Gear Kit for DJI Phantom 1 / 2

5.8G 40CH reversible 25mW to 600mW FPV transmitter  Fatshark compatible

• Description:
  Item Name:  5.8G 40CH reversible 25mW to 600mW FPV transmitter    

  Item NO.: SJ-T525

  Modulate: Wideband FM Modulate

  Frequency: 25mW/600mW     

  Output Power: 13dBm-26dBm 

  Channel: 40 CH

  Operating Voltage: 7V-24V

  Supply Current : 200mA

  AV input, direct input analog audio and video signals

  Working frequency: 5705-5945Mhz

  Product Dimension: 26mm x 96mm x 25mm ( the singal TX, not include antenna) 

  Weight: 15g ( include mushroom antenna                                                                            

lipo 2600mAh Phantom DJI FC40 / F330

Spec.
Capacity: 2600mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 35C Constant / 70C Burst
Weight: 185g (including wire, plug & case)
Dimensions: 106x35x24mm
Balance Plug: JST-XH
Discharge Plug: XT60

Lipo 2400mAh Phantom DJI FC40 / F330

Spec.
Capacity: 2400mAh
Voltage: 3S1P / 3 Cell / 11.1V
Discharge: 35C Constant / 70C Burst
Weight: 185g (including wire, plug & case)
Dimensions: 106x35x24mm
Balance Plug: JST-XH
Discharge Plug: XT60

Support for two batteries for phantom dji F330

fiber support released for charge two batteries of 2200-3000 mAH.

weight of 60 gr¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡

with this support, the train is 12 mm height

assembly process

ponemos las bases redondas

ponemos las bases y patas y listo