Set V2 of FOLDABLE QUAD/X8 25mm

Set contain:
- center boards FULL CARBON VERSION,
- four motor mounts (QUAD + X8 mode) FULL CARBON,
- four arms 280mm long 25/23mm carbon fiber,
- all screws, spacers, small parts,
- power distribution tower,

Free parts also included:
- 215mm landing legs
- controller plate
- top LiPo plate
- GPS mount v2

Dimesions and weight:
  - arms 280mm - m2m distance 700mm - propellers up to 16", weight <> 720g,,

Materials: CARBON FIBER 3K 2.5mm thick center boards, carbon arms 25mm/23mm

opcional :

Optional products / upgrades (you should buy it separetely):
- protective cage
- clear dome: 

Set V2 of FOLDABLE SIX PRO 

Set contain:
- center boards FULL CARBON FIBER VERSION,
- motor mounts FULL CARBON,
- arms 280mm long 25/23mm carbon fiber,
- all screws, spacers, small parts,
- power distribution tower,

Free parts also included:
- 215mm landing legs
- controller plate
- top LiPo plate
- GPS mount

Dimesions and weight:
   - arms 280mm - m2m distance 710mm - propellers up to 13", weight <> 970g,

Materials: CARBON FIBER 3K 2.5mm thick center boards, carbon arms 25mm/23mm

Optional products / upgrades (you should buy it separetely):
- protective cage

- clear dome

Remember that any motors and propellers should be ballanced before using it!

The specifications and designs are subject to be changed without prior notice for futher improvement. 

Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies.

PRO OCTO, 25x400 mm Carbon 3K

QuadFrame, Heawy weight PRO OCTO frame with 25mm carbom arm tubes

OCTOcopter frame prepared for most popular controllers like ArduPilot Mega, ArduPilot Mega 2, 45x45mm boards like MultiWii and other like DJI
Naza / Wookong 
 

Hard frame with strong structure and incorporates a distribution plate for easy mounting (controllers and motors), used for video, photography and FPV

Materials: Black Fiberglass G10/G11 2.5mm thick, carbon 3K tubes arms 25x400 mm 

Size: 900mm motor to motor distance (diagonal)

Propeller: up to 13"

Motor mounts: Big and Anti-Vibration Designed.

Weight: 1290g (frame with motor mount and without legs)

You can use smaller motors (with 16x19mm screw holes) or bigger (with 19x25mm holes).

Recomended motors and propellers: typical 300-900kV motors with 10"-13" propellers with thrust up to 3.5kg/motor.

Remember that any motors and propellers should be ballanced before using it!

Included parts: 

    - two black 2.5mm fiberglass main plates,
    - protective black fiberglass cage parts (1mm),
    - 25mm carbon arms
    - 8 x Motor mounts Anti-Vibrations
     - power distribution board,
     - clear dome, some velcro for dome mounting,
    - zipties,
    - screws, nuts, washers, spacers etc

QuadFrame, Heawy weight PRO Hexa frame with 25mm carbom arm tubes

HEXAcopter frame prepared for most popular controllers like ArduPilot Mega, ArduPilot Mega 2, 45x45mm boards like MultiWii and other like DJI
Naza / Wookong 
 

Hard frame with strong structure and incorporates a distribution plate for easy mounting (controllers and motors), used for video, photography and FPV

Materials: Black Fiberglass G10/G11 2.5mm thick, carbon 3K tubes arms 25x400 mm 

Size: 855mm motor to motor distance (diagonal)

Propeller: up to 15"

Motor mounts: Big and Anti-Vibration Designed.

Weight: 920g (frame with motor mount and without legs)

You can use smaller motors (with 16x19mm screw holes) or bigger (with 19x25mm holes).

Recomended motors and propellers: typical 300-900kV motors with 10"-15" propellers with thrust up to 3.5kg/motor.

Remember that any motors and propellers should be ballanced before using it!

Included parts: 

    - two black 2.5mm fiberglass main plates,
    - protective black fiberglass cage parts (1mm),
    - 25mm carbon arms
    - 6 x Motor mounts Anti-Vibrations
     - power distribution board,
     - clear dome, some velcro for dome mounting,
    - zipties,
    - screws, nuts, washers, spacers etc

gimbal and camera not incluid

V2 of FOLDABLE QUAD/X8 25mm CARBON arms 280mm

Materials: Fiberglass G10/G11 2.5mm thick center boards, carbon tubes 25mm/23mm
Optional material: carbon fiber 3K, 2.5mm think (see options bellow).

Basic set contain center boards, four motor mounts (QUAD mode), all screws,
spacers,power distribution tower, etc arms, (you can buy this frame w/o arms too
- your choice),

FOLDABLE QUAD X4/X8 PRO frame with 25mm CARBON arms 400mm arms

Comparing to previous version:
- foldable design, strong like standard version (or even stronger?),
- you can place ESCs near motors, or close to the center plates on arms,

We offer this frame in a few versions:
   - all parts w/o arms - if you have your own arms,
- for propellers up to 15"
   - with 400mm long arms
 

Materials: Fiberglass G10/G11 2.5mm thick center boards, carbon tubes 25mm/23mm

Weight: <> 720g with carbon fiber arms (with 370mm arms, including motor mounts).

Basic set contain center boards, four motor mounts, all screws, spacers,
power distribution tower, etc arms, (you can buy this frame w/o arms too - your choice),
one standard arm, two arms with extra mounting holes (see photos),

Included parts:

    - two black 2.5mm fiberglass main plates,
    - four motor mounts with boom block,
    - Power Distribution Tower
    - zipties,
    - screws, nuts, washers, spacers etc
    - arms carbon 3K twill, arms lenght your choice (or no arms),

Assembly manual - it's easy just follow photos:

The specifications and designs are subject to be changed without prior notice for futher improvement. 

Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies.

FOLDABLE Heavy SIXcopter frame with 21.5mm tubes 370mm arms

Comparing to previous version:

- foldable design, strong like standard version (or even stronger?),
- you can place ESCs near motors, or close to the center plates on arms,

We offer this frame in a few versions:
1. all parts w/o no arms - if you have your own arms,
2. with 370mm long arms - for propellers up to 14"

Materials: Fiberglass G10/G11 2.0mm thick center boards, carbon tubes 21.5mm/19.50mm

Size: <> 680mm motor to motor distance (diagonal) with<> 770mm diameter with 370mm long arms.

Weight: <> 790g with carbon fiber arms (with 325mm arms, including motor mounts).

Basic set contain center boards, motor mounts, all screws, spacers,
power distribution tower, etc arms 370mm lenght
(you can buy this frame w/o arms too - your choice),
two arms standard, four with extra mounting holes (see photo),

Included parts:

    - two black 2.0mm fiberglass main plates,
    - six motor mounts with boom block,
    - Power Distribution Tower: http://quadframe.com/products/power-distribution-tower
    - zipties,
    - screws, nuts, washers, spacers etc
    - arms carbon 3K twill, 21.5x325mm or 21,5x370mm - your choice (or no arms),

Assembly manual - it's easy just follow photos:

The specifications and designs are subject to be changed without prior notice for futher improvement. 

Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies.

310mm clerance landing legs

Short descriprtion: 310mm clerance landing legs, prepared for Photohigher AV200 gimbal (and others).

Product Code: 310mmLL  

Materials: Fiberglass G10/G11 2mm thick, aluminium tubes 6-8-12x1mm.

Size: 310mm clearance, big space for LiPos.

Weight: <> 490g

Included parts: Fiberglass elements, long aluminium spacers with brass inserts, all needed screws, two belcros etc.

Description: HUGE landing legs. Will be high enought for big gimbals like AV200, Cinestar (adapter in stock soon),
Prepared for AV200 gimbal (and similar).

Big space for LiPos - you can fit 2x 5000mAh 3S LiPo, maybe even 2x 5000mAh 4S. Span of the base (skids) <> 500x500mm.

Optional accessories: You can buy legs alone or with two optional accessory plates-

Medium weight SIXcopter frame with 16mm tubes

Materials: Fiberglass G10/G11 1.7mm thick center boards, 1.0mm protective cage. Clear dome 0.2mm thick.

Size: <> 680mm motor to motor distance (diagonal) with 315mm arms.

Weight: <> 635g with carbon fiber arms (including motor mounts).

Recomended motors and propellers: frame is designed for medium motors and medium weight payload. 10-12" propellers with thrust up to 1.0kg/motor. You can use bigger propellers (12") but please don't exceed 1.0kg thrust per arm!

Remember that any motors and propellers should be ballanced before using it!

Included parts:

    - two black 1.7mm fiberglass main plates,
    - six motor mounts (standard size) with boom block,
    - protective black fiberglass cage parts (1mm),
    - power distribution board,
    - clear dome, some belcro for dome mounting,
    - zipties,
    - screws, nuts, washers, spacers etc

Short description: medium weight SIXcopter frame prepared for most popular controllers (see drawning bellow).

Materials: Fiberglass G10/G11 1.7mm thick center boards, 1.0mm protective cage. Clear dome 0.2mm thick.

Size: <> 680mm motor to motor distance (diagonal) with 315mm arms.

Weight: <> 635g with carbon fiber arms (including motor mounts).

 

The specifications and designs are subject to be changed without prior notice for futher improvement. 

Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies.

215mm clearance landing legs

Short descriprtion: 215mm clerance landing legs, prepared for Photohigher AV130 gimbal (and others).

Product Code: 215mmLL  

Materials: Fiberglass G10/G11 1,6mm thick, aluminium tubes 6-8x1mm.

Size: 215mm clearance, big space for LiPos.

Weight: <> 290g

Included parts: Fiberglass elements, long aluminium spacers with brass inserts, all needed screws, two velcros etc.

Description: Medium high landing legs. Will be high enought for GoPro gimbals, smaller p&s cameras,
prepared for AV130 gimbal (and similar).

Strong construction withstand over 20kg of pressure without any problems. Big space for LiPos - you can
fit 2x 5000mAh 3S LiPo, maybe even 2x 5000mAh 4S. Span of the base (skids) <> 400x400mm.