Ultra AC/DC EQ charger

Overview:
The ULTRAMAT AC/DC EQ brings style and performance together in a package that looks as great as it performs. Integrated balance technology in addition to a 7 amp charge rate make this charger a top choice amongst RC enthusiasts looking to get the most bang for their buck. Powering the unit is as easy as choosing which power source to use, AC or DC. The ULTRA AC/DC EQ charger includes banana plugs with an alligator clip for easy connection to source and easy operation

Characteristics:

• 11.0-15.0V DC or AC 100V ~ 240V / 50 ~ 60Hz input.
• Integrated 1-6S Li-Po balancer
• Variable 7 amp charge rate provides quick charge times
• AC/DC input provides flexible charging capabilities
• Charges 1-6S LiIon/LiPo batteries
• Easy balcing with Included the multi balancer board
• Includes an alligator clip with banana plug terminals
• Banana plug inputs provide flexibility when choosing appropriate connector type

The Set contains:

• ULTRAMAT AC/DC EQ charger
• Mains connecting cable
• XH 6S adapter board and 6S cable
• Charger cable
• English instructions

Specification
All-up weight, approx.: 684 g
Max. discharge current: 0,1 ... 1 A
Charge facility: NiCd, NiMH, LiPo, LiFe, LiIo, Pb
Dimensions (LxWxH): 160 x 152 x 69 mm
Balancer socket: 1-14 NiCd,NiMH/1-6 Lixx/1-6 Pb

Telemetrie adapter NAZA/HoTT ANYSENSE

Just 5 Gr.¡¡¡

Description:
With this adapter the DJI NAZA telemetry data will be converted in HoTT telemetry data and will be shown in the Graupner/SJ HoTT transmitter.
The AnySense Telemetry Module was conceived specifically for the use with DJI NAZA flight control systems. The AnySense can provide telemetry informations in real time, to show you important information about the state of the model during the flights.
It can show current, flight speed, height, distance from starting point, GPS coordinates, GPS satellites count etc'
The telemetry informations are sent to the telemetry-capable receiver, so that the telemetry data can be comfortably seen on the transmitter to give you a new flight experience.
The AnySense should be used in combination with a DJI Autopilot system. It offers two telemetry outputs, which can be configured through a Windows app. The AnySense telemetry module supports online upgrades.
The AnySense module is equipped with many voltage warning thresholds for Graupner/SJ HoTT. It supports the FrSky S-Port protocol too.
It is required a CAN-BUS cable 33642.4 or CP.WK.000036 for connection.
The AnySense will be connected to NAZA-M or NAZA-M V2 through PMU V2.
To configure by PC it will be necessary the USB cable #33462.1.
A connection cable for MAVLINK OSD is available and it allows, with the appropriate OSD modules, to see the data representation in the On Screen Display in the telemetry goggles.


Content of the package:
1x AnySense Telemetry Module. Connect the AnySense to DJI Autopilot system by CAN-BUS cable. The AnySense communicates with the flight controller, receives data from the flight controller and transfers the whole information to the R/C receiver.
1x R/C telemetry cable. Connect the AnySense to the R/C receiver by this cable.

Specification
All-up weight, approx.: 5 g
Dimensions (LxWxH): 21 x 30 x 10 mm

Set motor COMPACT 345 ideal para easy glider...

Specification

Operating voltage range: 7 2 ... 11.1 V
Cell count, NiMH: 6 ... 8
Cell count, LiPo: 2 ... 3
COMPACT motor: 345 / 7.4 V
Motor shaft diameter: 4 mm
Recommended propeller size approx.: 25 x 125 cm
Recommended precision spinner Order No.: 6038.4 or 1304.4
Motor current with 2 LiPo: approx. 22 A, approx. 600 p thrust
Motor current with 3 LiPo: approx. 33 A, approx. 1000p thrust
EMF brake: programmable
Low-voltage power-down: programmable
Power-on pulse suppression: yes
Pulse frequency: 32 kHz
BEC power supply approx.: 5.5 V / 2 A
Max. BEC current, pulsed: 4 A
Connectors: G3.5
Weight approx.: 130 g

Power supply 13.8 V, 12A Graupner

Balancer adapter 2-8S EH, XH, TP, PQ

AC-Adapter TX 4,2 V500 mA

NiMH Akku 4NH-2600 TX/RX RTU flach,SJ S

Description
NiMH batteries with particularly low spontaneous discharge and long service life Ready to use!

Ready to use:

• Very low self discharge; after 12 months, still approx. 85% of nominal capacity
• Higher capacity compared with standard transmitter batteries
• Particularly suitable as transmitter and receiver batteries
• Low cost, particularly in comparison to LiPo batteries
• High-quality gold contact plug connections
• Quick-charge capability

Specification
Plug connector: SJ/JR
Voltage: 4,8 V
All-up weight, approx.: 125 g
Rechargeable: schnell und normal
Type of battery for selection: GRAUPNER 4NH-2600 RX
Capacity: 2600 mAh
Dimensions (LxWxH): 58 x 53 x 15 mm

Li Battery Balancer w/stor. disch. mode

Description
Practical test instrument for receiver and Li batteries 2 - 6 S with integrated balancer and discharge mode for subsequent storage of the battery.

• Receiver battery voltage measurement
• Single cell display Li 2 - 6 S
• Balancer mode
• Discharge mode for subsequent storage of the battery
• Compatible with EH (Graupner) and XH balancer connector

Technical data:
LiPo/LiFe: 2 ... 6 cells
Receiver battery: 1.2 ... 12 V DC (with ext. power source 7.4 ... 11.1 V)
Lower limit for balancer voltage: 2.0 ... 3.9 V (factory setting: 3.3 V)
Discharge voltage: 3.0 ... 4.2 V (factory setting: 3.9 V) Specification
All-up weight, approx.: 71 g
Dimensions (LxWxH): 94 x 61 x 18 mm

Digital Servo DES 131 SH 11 mm

Especially suitable for indoor flight models.

     Miniature SH slowflyer connector
     Suitable for HoTT receiver # 33565 GR12SH
     Accessory bag with extra long and shaped servo levers
     Fastest positioning times
     Smallest dimensions
     Absolutely low weight
     Parameter adjustable via PC software
     Carbonite