FPV 5.8GHz 9CH 1200mW wireless + clover antena

compatible with the Fatshark Aviator 5.8Ghz and Dominator in 5.8Ghz goggles.

You can get 2km range without any problem and 10 Km. range with optional Patch 18dbi 5.8Ghz

Fully compatible with 2.4GHz R/C radios!

It is designed and tested to offer the lowest possible RF and EM output so as not to interfere with any of your sensitive RC components. The transmitter operates from a 6V-16V input voltage and generates very little heat despite the broad input voltage range.When powered a red LED indicates the transmitter is working. An aluminum base plate is used to keep the transmitter running cool and with a total weight of just about 20g this is a perfect companion to the Fatshark Aviator and Dominator 5.8Ghz.

TX spec.:
Weight:35g
Dimension:70*38*18.5mm
Working Voltage:DC12V
Working Current:700mA
Working Frequency:5.8G
Working Channels:9CH
Working Power:1200mW
Transmission Distance: +-1000m in the open space.

RX spec.:
Weight:67g
Dimension:72*43*11mm
Working Voltage:DC12V
Working Current:200mA
Working Frequency:5.8G
Working Channels:9CHFPV 5.8GHz 9CH 1200mW wireless + clover antena

Flysight Black Mamba TX5820 V2 5.8Ghz 2000mw wireless FPV video 40 CH. PPM function 6-28v

*** The frequency 5.8 GHz is limited to a power output of 25 mW. the use of equipment that exceeds this power is not allowed in the European Union,
The use of these equipment would be under the responsibility of the client. ***

- Available channel:40CH (compatible with Fatshark, ImersionRC and DJI product)

- 40 Channels
- RF power (2000mW) is high, long distance (about 9Km)
- On-board quiet fan build-in
- High brightness LED display
- Not affect by 2.4GHz R/C Radios
- Small size,light weight,easy to carry
- Special design with cover.

Specification:

 Working frequency: ISM 5.8GHZ
- Available channel: 32CH (compatible with Fatshark, ImersionRC and DJI product)
- Transmitting power: 2W (33dbm, +/- 1dB)

- Transmitting distance: >9km (depends on open area)
- Power supply: DC 6-28V

- TX output voltage: 5V/12V optional
- Comsumption current: 800mA
- Antenna impedance: 50Ω
- Antenna gain: 2dB
- Antenna connertor: SMA/RPSMA optional

- Dimension: 55*35*27mm(L*W*H) (include fan dimension)
- Weight: 52g

Frequency Channel Group: A, B, E, F

A: 5865 5845 5825 5805 5785 5765 5745 5725Mhz
B:5733 5752 5771 5790 5809 5828 5847 5866Mhz
E:5705 5685 5665 5645 5885 5905 5925 5945Mhz
F:5740 5760 5780 5800 5820 5840 5860 5880Mhz

Package Includes:

1x TX Flysight 5.8Ghz-2W

1x 5.8GHZ Antenna
1x 2pin cable

1x 4pin cable

1x 5pin cable

1x 6pin cable

1x HUB cable

1x Manual

Note

Antennas must be attched before powering on.

TX-5D 5.8G 600mW 32 Channel HDMI to AV Transmitter Module

*** The frequency 5.8 GHz is limited to a power output of 25 mW. the use of equipment that exceeds this power is not allowed in the European Union,
The use of these equipment would be under the responsibility of the client. ***

Product Description

TX 5.8GHz 9CH 1200mW wireless AV transmitter + Circular Polarized spiroNet Antenna

*** The frequency 5.8 GHz is limited to a power output of 25 mW. the use of equipment that exceeds this power is not allowed in the European Union,
The use of these equipment would be under the responsibility of the client. ***

compatible with the Fatshark Aviator 5.8Ghz and Dominator in 5.8Ghz goggles.

You can get 2km range without any problem and 10 Km. range with optional Patch 18dbi 5.8Ghz

Fully compatible with 2.4GHz R/C radios!

It is designed and tested to offer the lowest possible RF and EM output so as not to interfere with any of your sensitive RC components. The transmitter operates from a 6V-16V input voltage and generates very little heat despite the broad input voltage range.When powered a red LED indicates the transmitter is working. An aluminum base plate is used to keep the transmitter running cool and with a total weight of just about 20g this is a perfect companion to the Fatshark Aviator and Dominator 5.8Ghz.

TX spec.:
Weight:35g
Dimension:70*38*18.5mm
Working Voltage:DC12V
Working Current:700mA
Working Frequency:5.8G
Working Channels:9CH
Working Power:1200mW
Transmission Distance: +-1000m in the open space.

SkyZone TS353 5.8G 400mW FPV Transmitter

This SkyZone 5.8G 400mW 8 Channel Video Transmitter features a high power output for longer range with your FPV models. It also offers a compact size with built in heatsink to ensure your components stay cool.

Features:
5.8G Technology 5645MHz~5945MHz
8 Channel selectable

Specs:
Video Format: NTSC/PAL
Operating Voltage: DC 7~14V
Supply Current: 220mA
Antenna Connector: RP-SMA 
Dimensions: 55 x 26 x 17mm
Weight: 25g

5800MHz 400mW TS353 Wireless Video Sender Channels & Frequencies

5.8G : 5705,5685,5665,5645,5885,5905,5925,5945MHZ 

Included:
1 x 5.8G 400mW transmitter
1 x Antenna
Wire lead

AOMWAY 700TVL CMOS Camera w/ built-in 5G8 200mW TX(HB200CAM

ransmitter description:
5.8G FM AV sender
Power: 200mW 23DB
Built-in four frequency optional: 5740-5860MHz/5705-5925MHz/5725-5865MHZ/5733-5866MHZ
32 Channel
Stereo sound, left/right track independant transmission
PAL/NTSC
Wide input voltage DC6-24V
With 5db omnidirection antenna

Camera description:
Video sensor: 1/3 CMOS
700 TVL

SkyZone FPV 5.8 GHz 40CH RD40 Diversity Receiver With A/V and Power Cables

SkyZone FPV 5.8 GHz 40CH RD40 Diversity Receiver With A/V and Power Cables

SkyZone has forged a reputation of quality and reliability and has been tested and developed by FPV pilots for FPV pilots.

The RD40 Diversity Receiver is nice and small in size for easy integration into your ground station, but big in quality and features. There are two independent AV outputs for both audio and video. So you can use a monitor and a set of goggles or maybe a DVR to record your flight, great for when your significant other asks where you were for the last 4 hours!

Powering the receiver at the field is as easy as plugging in a 3 cell lipoly into the included prewired cable with mini JST. It just doesn’t get any simpler than this.

Features:
• 40 channels: Cover A, B, E, F and R bands
• Diversity receivers
• Two switching buttons for the band and channel
• Two digit display for the band and channel
• Power off memory for last channel and band
• Dual independent video and audio signal outputs

Specs:
Video format supported: NTSC/PAL/CECAM
Antenna connections: RP-SMA jack
Power input: 7~24V
Working current: 280mA max
Rx sensitivity -90dBm
Video impedance: 75Ω
Dimension: 80x 65 x15mm
Weight: 100g

Frequency range:
FR1: 5865M 5845M 5825M 5805M 5785M 5765M 5745M 5725M
FR2: 5733M 5752M 5771M 5790M 5809M 5828M 5847M 5866M
FR3: 5705M 5685M 5665M 5645M 5885M 5905M 5925M 5945M
FR4: 5740M 5760M 5780M 5800M 5820M 5840M 5860M 5880M
FR5: 5658M 5695M 5732M 5769M 5806M 5843M 5880M 5917M

Included:
RD10 Diversity receiver
Power and A/V cables
2 dipole antennas
Instructions

Aomway 5.8GHz 1000mW TX1000 Video Transmitter

*** The frequency 5.8 GHz is limited to a power output of 25 mW. the use of equipment that exceeds this power is not allowed in the European Union,
The use of these equipment would be under the responsibility of the client. ***


immercion and fatshark compatible

The Aomway 5.8GHz 1000mW TX1000 is the perfect option for those that are looking for a high power output transmitter with integral cooling fan, ideal for long range FPV work in one easy to use unit.

The TX1000 video transmitter packs 1000mW of ultra clean 5.8GHz power in a conveniently sized and durable video/audio package! Adjustable frequency selection and a selectable 5 or 12 Volt camera power output makes this a must have for those looking for a robust transmitter with good performance. 

Note: Please check with your local authorities regarding the operation of this equipment before you purchase. Regulations on power output, usable frequencies and licenses’ to operate vary from region to region.

Note: For best range and video link stability we recommend using a circular-polarized Antenna  (SMA) available below in the accessory’s tab

Features:
• Upgraded video circuit and sensitivity, with 1W telemetry
• Blue semi - transparent shell, more convenient for use
• 5.8GHz band FM audio/video transmit synchro
• Stereo, left/right audio channel independent transmission

Specs:
Range: approximately 32KM
Low consumption: 12V 700mA
Power: 1000mW/30dBm
Frequency: 15CH, CH1-7, +CH1-8
Built-in two emission frequency: 5740-5860MHz/5705-5945MHz
Format: NTSC/PAL
Wide input voltage: DC7-16V
Output Voltage for CMOS camera operation: 5V or 12V (switch through jumper)
Current: 12V 650mA
Antenna Connection: SMA
Size: 63x35x24mm
Weight: 42g with case

Package Includes:
One 1000mW Transmitter
One 3db Antenna
One Video cable

Wireless Amplifier for 5.8G Transmitter (5700MHz - 5900MHz)

PA5801 amplifies the image wireless transmission of 5.8G devices to increase the video imaging range of the transmitter.

With the PA5801, the image wireless transmission range can go up to 1 KM.

The Walkera PA5801 can work on 5.8G devices such as TX5803 and 5804.

User notice

When connecting the electricity wire to the Walkera PA5801 power connector, please do not reverse the positive (+) and negative (-) polarity. Wrong connection attempt may result in power failure, causing damage to the PA5801 device.

Users may follow the diagram in the image holder above to connect the Walkera transmitter to PA5801.

Walkera PA5801 Specifications

Eagleye Alloy Transmitter 5.8GHz 600mW 32 Channels

This is a new designed Transmitter works on 5.8GHz full band 32 channels. It is whole alloy cased and the heat-sinking is very effictive. Works on 2S to 6S wide voltage. LED Digital Read-out and very simply operation.

 Alloy Transmitter AT32H Fetures:
* The button automatically locked in case of mistake hangling. 
* The Power-amplier protection fuction to reduce the chances if no antenna on the Tx when power ON.
* Built-in high quality Audio processor
* The transmitter comes with high quality mushroom antenna to ensure the great performance

Specifications:
* Transmission Frequency: 5.8GHz
* Working Channels: 32CH
* Output Power: 600mW
* LED digital read-out for channels display
* A-button operation, very simply use






Why you need the Alloy Transmitter?

The harmless if the temperature is excess: if the temperature rise of 20 degrees, the transmission power will reduce the > = 100mW.

  

 

If there is no good heat dissipation, the power will be highly reduce. 

Why Alloy?

 

Alloy shell design and function

* Thermal silica and alloy to replace air cooling capacity doubled
* Cooling area doubled
* Alloy casing completely absorbed heat transfer map
* Alloy shell can protect important components
* Alloy casing can shield interference



Fetures ONE of Alloy Transmitter:
* 32 Channels 5.8GHz 600mW 
* 2S ~ 6S wide range voltage 
* A-button operation, simple use
* LED digital-read for channels change





Fetures TWO of Alloy Transmitter:

1) Button automatically locked to prevent misuse
When the aircrafts crashed, if you accidentally hit the key figure pass the object will change the frequency, causing the receiver can not receive the image transmission signal. There are key lock function, can effectively prevent this happening.

2)Amplifier protection against burn image transmission antenna off
Many figure will pass because there is no antenna burned. But in the course, the antenna will inevitably loose the case, resulting in image transmission burned. This feature greatly reduces the incidence of burn image transmission case.

3) High-quality built-in audio processing
Audio circuit using a dedicated amplifier IC, to restore the best sound quality, real-time monitoring of aircraft operating conditions.

4) Configuration of high-quality mushrooms antenna
Avoid due to poor antenna quality, impact the case of FIG pass performance.