DJI E800 3510 Motor (CCW)

DJI E800 3510 Motor CCW

Los motores sin escobillas desarrollados por DJI ahora son el estándar en la industria multirotor. Pero el Inspire 1 da el siguiente paso en el desarrollo de motores brushless integrando imanes curvos que se ajustan alrededor del borde del bobinado del motor. Aunque son mucho más difíciles de producir, estos imanes eliminan los espacios de flujo de aire dentro del motor, aumentando considerablemente la eficiencia.

Este es el motor de repuesto para el Inspire 1
 

Características E800 3510 CCW

- 350 RPM
- Bobinado de un solo alambre de doble capa
- Disipacion de calor del bobinadom, mejorada. Aumenta la eficiencia
- Bobinado aguanta mas ampererios

Especificaciones del motor 3510 CCW:

◾Carga recomendada: 800 g / eje


◾Bateria recomendada: 6S Lipo


◾Carga maxima: 2100 g / eje


◾Temperatura de trabajo: -5 ° C a 40 ° C


◾Tamaño Starto: 35 × 10 mm


◾KV: 350 rpm / V


◾Peso: 106g

DJI E600 Motor 3508 / 415KV (CCW)

DJI E600 Motor 3508 / 415KV (CW)

Motor Dji 2212 E300 MOTOR CW

DJI MOTOR PHANTOM 2212/920KV

DJI E305 2312E Motor (800kv,CW)

DJI E800 620S 20 Amp. OPTO Speed Control (ESC)

New model E800 620S ESC 20 Amp, 22.2V (6S)

The DJI E800 620S 20A Opto ESC is a replacement ESC for the E800 Tuned Propulsion system. The E800 620S ESC's are part of the Tuned Propulsion system designed for multi-rotor use, the higher thrust to weight ratio from the E800 system increases the reliability, stability and agility of flight through enhanced aerodynamics and efficiency from the motor and propeller combination.

The DJI 620S ESC's are the most advanced ESC in multirotor industry today because they use a much more efficient sine wave driver which has replaced the traditional square wave driver found in other ESC’s. The addition of a high performance MCU and extra bus communication allows the 620S ESC’s to control the motor in a “closed loop”, while monitoring the health and condition of the system in real time with DJI's "Smart ESC interface". The 620S ESC’s have an anti-spark circuit that is used to protect the circuit and the connectors during removal and connection of power to the ESC. The 620S's also have an active braking and energy recovery system that allow for additional manoeuvrability; this also helps to save precious battery power at the same time. The 620S ESC's have a built in LED to help with navigation at longer distances and to communicate the ESC status. DJI have added a data port to the ESC which will allow for future firmware updates online.

The 620S ESC is designed to work with the Tuned Propulsion system and the recomended propeller to use is the 13 x 4.5 with the E800 3510 motors.

Improved ESC along with new-highly efficiency and quick response algorithms, providing extra maneuverability and stability in wind and during descending. By using coaxial-cable, which provide a calm electromagnetic environment for the airborne sensors.

Features:

- Plastic case
- Current: 20 Amp.
- Frequency: 30-450Hz.
- OPTO: Yes
- Battery: 25 V. max (6S max)

DJI MOTOR PHANTOM 2212/850KV

Part1 S1000-Premium Power Cord Plug

Regulador DJI E310 420S ESC