Strobon SE is a powerful LED strobe controller with low power consumption (50mA per hours) and it saves your plane's life when you lose the orientation or plane’s current position at night.

Strobon SE drives any Power LED with 1000mA for 40ms (2 x 20ms pulses) on every second and this generates very bright flashes with very low power consumption (50mAh).

STROBON Lights are most powerful navigation lights on the model market since years.

It’s powerful but power consumption is only 50mA per hours because of strobe method.
It's visible from 2-3km away at night and saves your plane's life when you lose the orientation or plane’s current position.

STROBON drives the Power LED with 1000mA  for 40ms (2 x 20ms pulses) per seconds and this makes very bright flashes with low power consumption (50mAh).

It is allowing 2 different working modes, RC mode or Standalone.

• Power it with directly from battery (3.5-6v) it works on Standalone mode and strobes continuously.
• Plug it on your RC receiver’s any channel for RC mode, then you can On/Off  it over servo channel.

Strobon SE has completely same circuit design with our revolutionary STROBON Navigation Strobes excluding the LED and size.

It is more flexible design than other LED embedded Strobon models.
You can choose any Power LED(1W)  and install only the LED body outside of your flying platform. 

Strobon SE also drives more than one Power LED (the colors must be same for same forward voltage).

SCHEMATIC for SYNCRONIZED & RC CONTROLLED MODE

You can order Sotrobon SE compatible high quality 1W Power LEDs from our store
 

Customer Video, Thank you Fernando :)
(you can find the instructions and wiring details under the video description)