KIt XuGong v2/Pro – Foldable FPV Quadcopter
Es solo el kit:
contiene:
Frame
cableado para fpv y placa central
se recomienda
Max. Prop Size: 10 Inch
OSD: EzOSD-based, with Multicopter additions
Flight Controller: DJI Naza Lite, -M, v2 recommended, others supported
GPS: Naza GPS pickoff (Position + static Magnetometer)
Camera Switch: Manual, between Flight Cam, and GoPro, with auto-failover
Camera Power: 1.5A for GoPro, FlightCam powered from Video Tx
Flight Cam: Bracket to mount FatShark CMOS 600TVL + others (optional accessory)
Weight: AUW, RTF, ~1.5kg (typical)
Folded Size: 24cm W x 30cm L x 14cm H
Suitable Battery: 5200mAh 4s 10C recommended (for 20 minute flight times)
Suitable Motors: 2212/920kV, DJI E300, or Tiger AirGear 350
Flight Time: Typ. 20 min
Crash-Resistant arms
Fully Integrated PDB
A fully integrated Power Distribution Board includes an EzOSD-based On-Screen-Display, with all of the critical flight data displayed.
Not only is battery voltage, current, and mAh consumed displayed, but also a continuously updated estimate of remaining flight time.
With a newly released EzUHF firmware revision, all critical uplink status is sent down the single PPM stream. No need for a second ‘i2c’ link between the receiver and the OSD.
A built-in camera switch, with automatic fail-over in case a camera fails.
The XuGong’s beautiful CNC-milled foldable arms include an intentional break-away pin. This pin takes the brunt of the occasional hard landing, and can be easily replaced in the field.
For even harder landings (we sometimes call them crashes), the milled arms bend, without breaking, and may be gently bent back into shape without leaving the mountain-top, or tropical beach. Try to do this with cheap plastic alternatives…
The most portable FPV quadcopter on the market today. A full-featured quadcopter constructed from beautiful carbon fiber, and CNC-milled aluminiu
The FPV’ers Quadcopter
The XuGong v2/Pro was designed by FPVers, for FPVers.
Designed for fully immersive flight, delivering high-quality, stabilized video footage, from a tailor-made aerial platform.
Compact Foldable Design
Lightweight frame leads to > 20 minute flight times
Built-in EzOSD, with multicopter enhancements
Single-cable link to the EzUHF, with full up-link status
Carbon fiber frame, CNC milled aluminium arms
Integrated telemetry down-link
USB port for future upgrades
Version 2 of the XuGong, with Brushless Gimbal support, an integrated OSD, camera switch, GoPro supply.
Crafted from CNC'd, anodized aluminium, and carbon fibre.
This version for 10" props.
NOTE: The custom Brushless Gimbal for the XuGong v2/Pro is sold as a separate product (XUGONGV2GIMBAL)
A unique foldable quadcopter, which, when folded, will fit comfortably into a shoe-box.
Ideal for the FPVer/Photographer/Videographer who likes to travel. Designed for the hiker, the skiier, the snowboarder, the world traveller.
Folding arms use a unique locking mechanism, which requires no tools. 10 seconds from the backpack to power-up.
Specs:
- Designed for up to 10" Props
- >20 minute flight time with DJI E300, or Tiger Motor AirGear 350 ESC/Prop/Motor sets
- Vibration-free camera platform (clean/dirty frame), entire frame+battery+camera isolated from the vibrating parts
- Optimized for DJI Naza, but supports most other flight controllers. GPS, and Compass pickoff from the Naza GPS (no second GPS needed)
- Single-cable EzUHF Uplink Status (UPSTAT) support for even 4 channel receivers without i2c (EzUHF FW v1.51 and later)
- Integrated EzOSD, with full battery, uplink, GPS display.
- Integrated telemetry downlink, supported by ImmersionRC antenna trackers, and Smart Phone/Tablet applications.
Weight:
- Carbon frame: 96g
- 2-axis brushless gimbal: 140g
- All components ready for FPV, including GoPro Hero 4: ~1100g
- AUW, with 5200mAh 4s (10C) pack, and GoPro Hero 4: ~1.5kg
Full specs and photos on our public website here
