- A3 Pro Flight Controller, Superlative Performance.
- Complete Integration, Ultra Convenient
- Charge Six Batteries Simultaneously
- Aerial Imaging Solution
- Extended Flight Time and Transmission Range
- Professional HD Transmission
The Matrice 600 Pro (M600 Pro) inherits everything from the M600 with improved flight performance and better loading capacity..Preinstalled
arms and antennas reduce time required for setup, and the system’s modular design makes it easy to mount additional
modules.
The airframe is equipped with the latest DJI technologies, including the A3 Pro flight controller, Lightbridge 2 HD transmission system,
Intelligent Batteries and Battery Management system. All Zenmuse cameras and gimbals are natively compatible and full integration
with third party software and hardware make the M600 Pro ideal for professional aerial photography and industrial applications.
A3 Pro Flight Controller
The A3 Pro Flight Controller has triple modular redundancy and
diagnostic algorithms that compare sensor data from three sets of
GNSS units, with additional analytical redundancies for a total of six.
A new dampening system for the A3’s modules enable precise control
of multi-rotor aircraft, providing accurate data for stable flight
performance. Self-adaptive systems will automatically adjust flight
parameters based on different payloads. Compatibility with D-RTK
GNSS means that the A3 Pro can withstand magnetic interference,
providing centimeter-level accuracy, suitable for various industrial
applications.
Complete Integration. Ultra Convenient
The M600 Pro is simple and easy to set up, ready to fly in a matter of minutes. Its
airframe has been optimized for easier transportation with a quick-release landing
gear design and folding frame arms. Under the new upper cover, the positions of
GNSS modules and sensors have been revamped and a new dampening system
for the IMU units increases reliability during flight. The M600 Pro also comes with
a durable, customizable case that absorbs impact from shakes or falls, providing
all-round protection when carried or transported.
Charge Six Batteries Simultaneously
The M600 Pro charger has six charging hubs, enabling it to charge
six Intelligent Batteries simultaneously. All six batteries can be
fully charged in a short amount of time*, for quick and efficient
preparation.
*92 minutes for TB47S and 110 minutes for TB48S.
Aerial Imaging Solution
Dustproof propulsion systems simplify maintenance and active
cooling motors ensure that operation is reliable for extended
periods of time. The M600 Pro is natively compatible with current
Zenmuse cameras and gimbals. With a maximum payload of 6kg,
it effortlessly supports the Ronin-MX gimbal, DJI Focus and a
range of cameras from Micro Four Thirds systems to the RED EPIC
Extended Flight Time and Transmission Range
The M600 Pro has an extended flight time and a 5km* long-range transmission. A comprehensive battery management system means
that if any of its six Intelligent Batteries are turned on or off, the rest will follow suit. The battery management system monitors every
battery during flight, ensuring safe landing in the event of single battery failure. Compared to traditional non-intelligent batteries, the
M600 Pro’s battery management system simplifies maintenance while enhancing security.
Aircraft
Diagonal Wheelbase |
1133 mm |
Dimensions |
1668 mm × 1518 mm × 727 mm with propellers, frame arms and GPS mount unfolded (including landing gear)
437 mm × 402 mm × 553 mm with propellers, frame arms and GPS mount folded (excluding landing gear) |
Package Dimensions |
525 mm × 480 mm × 640 mm |
Weight (with six TB47S batteries) |
9.5 kg |
Weight (with six TB48S batteries) |
10 kg |
Max Takeoff Weight Recommended |
15.5 kg |
Hovering Accuracy (P-GPS) |
Vertical: ±0.5 m, Horizontal: ±1.5 m |
Max Angular Velocity |
Pitch: 300°/s, Yaw: 150°/s |
Max Pitch Angle |
25° |
Max Wind Resistance |
8 m/s |
Max Ascent Speed |
5 m/s |
Max Descent Speed |
3 m/s |
Max Service Ceiling Above Sea Level |
- 2170R propellers: 2500 m;
- 2195 propellers: 4500 m
|
Max Speed |
40 mph / 65 kph (no wind) |
Hovering Time* (with six TB47S batteries) |
No payload: 32 min, 6 kg payload: 16 min |
Hovering Time* (with six TB48S batteries) |
No payload: 38 min, 5.5 kg payload: 18 min |
Supported DJI Gimbals |
Ronin-MX; Zenmuse Z30, Zenmuse X5/X5R, Zenmuse X3, Zenmuse XT; Zenmuse Z15 Series HD Gimbal: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4 |
Flight Control System |
A3 Pro |
Propulsion System |
- Motor model: DJI 6010
- Propeller model: DJI 2170R
|
Retractable Landing Gear |
Standard |
Operating Temperature |
14° Fto 104° F (-10° C to 40° C) |
Charger (Model: MC6S600)
Voltage Output |
26.1 V |
Rated Power |
600 W |
Single Battery Port Output Power |
100 W |
Optional Battery (Model: TB48S)
Capacity |
5700 mAh |
Voltage |
22.8 V |
Battery Type |
LiPo 6S |
Energy |
129.96 Wh |
Net Weight |
680 g |
Operating Temperature |
14°F to 104° F (-10°C to 40° C) |
Max Charging Power |
180 W |
Remote Controller
Operating Frequency |
920.6 MHz to 928 MHz (Japan); 5.725 GHz to 5.825 GHz; 2.400 GHz to 2.483 GHz |
Max Transmission Distance |
FCC Compliant: 3.1 mi (5 km), CE Compliant: 2.2 mi (3.5 km) (Unobstructed, free of interference) |
Transmitter Power (EIRP) |
10 dBm @ 900M, 13 dBm @ 5.8G, 20 dBm @ 2.4G |
Video Output Port |
HDMI, SDI, USB |
Operating Temperature |
14°F to 104° F (-10° to 40° C) |
Battery |
6000 mAh LiPo 2S |
Standard Battery (Model: TB47S)
Capacity |
4500 mAh |
Voltage |
22.2 V |
Battery Type |
LiPo 6S |
Energy |
99.9 Wh |
Net Weight |
595 g |
Operating Temperature |
14° F to 104° F (-10°C to 40° C) |
Max Charging Power |
180 W |