DJI Ace One

No disponible en estos momentos

2.461,00
IVA INCLUIDO
Peso de entrega: 500 g

Producto bajo pedido

Semi Auto Take-off and Landing*

  • DJI enables semi auto take-off and landing feature in Ace One. This feature truly makes AP work a bit easier for most. GPS-cruise (auto mode) can now be the only mode for the entire flight; simply raise the throttle (collective) stick gradually when lift off rotor speed is reached the helicopter will take off with no cyclic inputs whatsoever.

    This feature can be upgraded easily from our website.

Easy Installation

  • Small footprint and weight ease installation in tight space and various helicopter sizes. A reduction of almost 500 grams in total weight can be better utilized for payload in AP applications while scale builders appreciate the weight saving.

Precise Hovering and forward flight

  • With Ace One your helicopter will hover precisely in fixed latitude, longitude and altitude even in windy condition. Your helicopter will fly like if it is on rail. Nervousness, stressful and uncertainty feelings are all but gone in flying RC helicopter. With Ace One you now can enjoy the hobby whether your interest is in aerial photography, scale flying or simply flying around while others are grounded in windy condition.

Control Modes

 

GPS Cruise Mode

GPS Atti. Mode

Atti. Mode

Manual Mode

 

  

  

  

 

Command Stick Meaning

Flight speed control; Stick center position for 0m/s, its endpoint for maximum speed set by user.

Helicopter attitude control; Stick center position for 0˚ attitude, its endpoint for 45˚which is a fixed limit.

Mechanical driving directly

Command Linearity

YES

NO

Stick Released

Lock the position when GPS signal is adequate

Only altitude stabilizing

Recommand for experience pilot only

Altitude lock

Maintain the altitude best above 3 meters

NO

Stabilization

Flybarless stabilizing on ELEV and AILE direction is available for all control mode

GPS Lost

After 10s when GPS signal lost,

System entersAtti. Mode.Automatically.

Only performing attitude stabilizing without position lock.

---

Safety

Maintain constant speed

Attitude & speed mixture control ensures stability.

Depends on experience

Enhanced fail-safe featured, auto hover or Go-Home if transmitter signal lost

Appropriate Applications

Long and smooth flight route

High agility for all flying

---

Enhanced Fail-Safe

  • Enhanced fail-safe is the feature to ensure that the helicopter will hover automatically when it loses RC signal. After loss of signal for a certain length of time, ACE ONE will calculate the safest route to the home position and control the helicopter to return home, hovering over your GPS start point eventually. This feature will guarantee the safety of your expensive payloads and equipment on the platform.

Built-in Gimbal Stabilization

  • The new gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the helicopter after setting the parameters the first time.

Built-in Engine Governor

  • The engine speed lock and governor are also standard features for ACE ONE. The built-in engine governor simplifies the parameter settings, and increases the compatibility of the system. All you need is to connect an extra standard sensor to use.

Built-in Tail Gyro

  • With built-in Tail gyro, no third party device were required.

Built-in Flybarless

  • Flybarless reduces the complexity of flybarred helicopter in maintenance and repair parts. It allows multi-blade for more payload, or scale application. DJI FLB provides electronic rotor head phasing. This feature is active in manual mode with FBL function enabled.

Standalone LED indicator support   new

  • We provide external LED Indicator module separately. This LED Indicator needs additional cost.

Factory data reset   new

ACE ONE is the latest generation of DJI's GPS/INS based helicopter autopilot system that combines the highest level of precise measurements and environment-independent rate of INS updates. ACE ONE's exceptional performance enables it for applications from commercial use, such as industrial aerial photography, to high-end military operations.

It works on all kinds of helicopters. Bi-blade or tri-blade rotorcraft; with or without flybar; all kinds of swash plates and rotor heads; electric or gasoline powered engines.

 

Anyone can install the ACE ONE quickly and easily.



Easy Installation
No need to install external frames and dampers, unlike with the previous designs of XP3.1 series. It minimizes size, reduces weight and simplifies installation, and thus the system can be installed on a much larger scale of helicopter models, while providing customers more options for physical installation.

Enhanced Fail-Safe
Enhanced fail-safe is the feature to ensure that the helicopter will hover automatically when it loses RC signal. After loss of signal for a certain length of time, ACE ONE will calculate the safest route to the home position and control the helicopter to return home, hovering over your GPS start point eventually. This feature will guarantee the safety of your expensive payloads and equipment on the platform.

Precise Hovering With the support of ACE ONE, your helicopter will be able to hover precisely with fixed latitude, longitude and altitude; even in strong wind, the hovering range will be limited to a very small area. With the help of ACE ONE, you will feel like you are driving a car instead of controlling a complicated helicopter.
It is simple and straight forward. You will find it much more fun and interesting, and the pilot will be able to focus on the task at hand without the concerns usually associated with operating an RC helicopter.

Built-in Features

  • Built-in Gimbal Stabilization
    The new gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the helicopter after setting the parameters the first time.

  • Built-in Engine Governor
    The engine speed lock and governor are also standard features for ACE ONE. The built-in engine governor simplifies the parameter settings, and increases the compatibility of the system. All you need is to connect an extra standard sensor to use.

  • Built-in Tail Gyro/FlybarlessThe tail gyro, FBL, engine governor and gimbal stabilization features are well integrated into a solid framework. All parts are controlled by one central unit. The helicopter works as a highly efficient unified system.

  • CONTROL MODES

  • AUTO MODE
    Control the helicopter in an easy way.
    The self-learning function allows first time players to control the helicopter with greater ease by automatically maintaining altitude The helicopters velocity command can be issued by the RC transmitter (TX) separately, and it gives accurate feedback via on-board automatic algorithm.
    When TX sticks are centred, the system will activate auto-hover accordingly.
    Flight speed is a real-time relation to the position of the TX stick.

  • ATTITUDE MODE
    The attitude-stability mode works with low or no GPS signal, such as areas of high rise buildings, valleys, under bridges or even in caves.
    The helicopter can be held in a fixed altitude without position or velocity locking when you switch into this mode.

  • MANUAL MODE
    With Manual mode the helicopter is fully controllable as an ordinary RC helicopter without any autopilot assistance.
  •  
  • http://www.dji-innovations.com/en/download.php



  •  
  •  
Examine esta categoría: Helicopter Systems DJI Innovations