Overview:

The MinimOSD was engineered to bring users a very powerfull OSD. With all the features of the very popuar minimosd KV Team modded OSD but in a tiny 15x15MM size.

Apart from the size, the only differenece is that it does NOT have the DC/DC converter - this means less heat when powered off a flight controller. The micro MinimOSD is the same as the older MinimOSD hardware but has been modified to take advantage of custom firmware options. You can flash firmware that is MAVLink compatible for ArduCopter, or MultiWii Serial compatible for MultiWii and Baseflight/Cleanflight control boards. You can connect two batteries up to 4S so you can see the main flight battery voltage.  The second port will allow a separate FPV battery voltage on the display as well. There is also a pin for analog or digital PWM RSSI and a connection where you can attach a current sensor.

Features:

- All the same features as the original, around 1/3 of the size.
- NO DC/DC converter. Power board via 5V DC.
- FTDI cable compatible pinout
- Two LED indicators
- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- 15x15MM size!
- Modifications for direct connection of two batteries (up to 4S)
- Pad for an Analog or Digital PWM RSSI signal
- Pad for the connection of a Current Sensor
- ATmega328P with Arduino bootloader

PLEASE NOTE: We cannot accept any returns after the board has been soldered/modified. Please test the board (via FTDI) BEFORE soldering the header pins on.