El Agras MG-1 de DJI ha sido creado para la gestión de cultivos, es autónomo y 40 veces más eficaz que la fumigación manual. Incorpora un sistema de pulverización, con capacidad de hasta 10 kilogramos de líquido, especialmente diseñado para conseguir la mayor eficacia en la fumigación de productos para el cuidado y gestión de los cultivos.
Este drone ha sido creado para ser por encima de todo, resistente a todo tipo de inclemencias. Es capaz de operar bajo la luvia y de resistir la corrosión provocada por la mercancía que generalmente va a portar.
Con capacidad para cargar más de 10 kg de líquido para fumigaciones, puede cubrir en una hora hasta 4 hectáreas. Esto lo convierte en un aparato 40 veces más eficaz que la fumigación manual.
El Agras MG-1 puede alcanzar una velocidad de hasta 8 metros por segundo al mismo tiempo que ajusta la intensidad de la pulverización a la velocidad del vuelo para conseguir una cobertura uniforme.
El drone para la agricultura Agras MG-1 de DJI utiliza un sistema de boquillas para pulverizar el producto que cargue en su depósito. Consta de 4 boquillas de cerámica, reemplazables, cada una alimentada por un motor. La vida útil de las boquillas es muy elevada.
Durante la fumigación, el flujo de aire generado por los motores hacia abajo aumenta la velocidad de pulverización y asegura que el producto llegue a la totalidad de la planta.
Radar de microondas
El MG-1 incorpora un sistema de control y posicionamiento por medio de un radar de microondas. Durante el vuelo, escanea el terreno manteniendo la altura y la distancia entre las plantas de forma automática, consiguiendo entregar la cantidad óptima de líquido al cultivo y asegurar así la uniformidad de los tratamientos. El sistema de control permite además reiniciar la fumigación en el mismo punto en el que se ha interrumpido.
Sistema de refrigeración
El drone Agras MG-1 de DJI está sellado, por ello cuenta con un sistema de refrigeración centrífuga. El aire es aspirado y filtrado desde el cuerpo central a través de un triple filtro contra el polvo y la humedad. Desde ahí se distribuye a cada uno de los motores por el interior de los brazos estructurales. El resultado es aumentar la vida útil de los motores hasta 3 veces más.
Emisora de control
La emisora de control del Agras MG-1 incorpora un panel a través del cual se pueden conocer diferentes datos tales como la velocidad, la altitud de vuelo, el caudal vertido del producto o la batería entre otros.

Cuenta con el sistema Lightbridge 2 de DJI y los usuarios de este drone pueden seleccionar los distintos modos de funcionamiento automático, semiautomático o manual dependiendo del terreno a trabajar.
.

Interchangeable Nozzle

Atomized Spraying

Diseño
El drone Agras MG-1 es resistente al agua y al polvo. Debido a las condiciones para las que ha sido diseñado, está construido con materiales anticorrosivos. Se limpia manualmente con agua para mantener el equipo en perfectas condiciones de uso. Además, da la posibilidad plegar partes estructurales consiguiendo reducir considerablemente su volumen hasta 780 mm x 780 mm x 482 mm y así facilitar su transporte y almacenamiento.

INTELLIGENT MEMORY
The MG-1 automatically records its current and remembers its past coordinates as it makes its way across the field. In case the operation is interrupted, for example due to depleted battery or spraying liquid, flight easily be resumed from the last point in its memory after changing the battery or refilling its tank.

Low Volume Warning

Flight Task Resume

System Data Memory
FOLDABLE DESIGN
The MG-1 design is based on a Y-type folding structure that can be installed without the use of any additional tools. Motor arms fold inwards making the aircraft compact and easy to transport, for example in the trunk of a car. Made from high-strength carbon fiber materials, the body frame is light yet durable and able to withstand the harshest conditions.
TERRAIN FOLLOW
By integrating a microwave radar together with the MG-1's intelligent flight control system, the aircraft is able to scan the below terrain in real-time, and adjust to keep a constant, centimeter accurate, height above crops. Spray density is maintained even as the terrain rises and drops, so that the optimal amount of liquid is applied at all times.
DEDICATED REMOTE CONTROLLER
The dedicated remote controller is equipped with the latest Lightbridge 2 transmission system which enables ultra low-latency controls. Like the aircraft body, the remote is designed with water and dust protection. A special low-energy display panel gives real-time flight information and is able to last over extended periods of time on a single charge. Together with the highly responsive joysticks and convenient function keys, mastering the art of agricultural spraying is made easier than ever before.
Dust-Proof, Anti-Splash
Dedicated Display Panel
Extended Working Time
Low Volume Warning
Battery Level
Spraying Speed
Flying Height
Flying Speed
AGRAS MG-1
Diagonal Wheelbase | 1520 mm |
---|---|
Frame Arm Length | 625 mm |
Dimensions |
|
Propulsion System
Motor
Stator Size | 60mm x 10 mm |
---|---|
KV | 130 rpm/V |
Max Thrust | 5.1 kg/rotor |
Max Power | 770 W |
Weight (with cooling fan) | 280 g |
Foldable Propeller
Material | High-performance engineered plastics |
---|---|
Diameter / Pitch | 21x7.0 inch (533x178 mm) |
Weight | 58 g |
ESC
Max Allowable Current (Continuous) | 25 A |
---|---|
Operating Voltage | 12S LiPo |
Signal Frequency | 30 to 450 Hz |
Drive PWM Frequency | 12 kHz |
Spray System
Liquid Tank
Volume | 10 L |
---|---|
Standard Operating Payload | 10 kg |
Max Battery Size | 151mm x 195mm x 70mm |
Nozzle
Model | TXVK-04,XR11001 |
---|---|
Quantity | 4 |
Max Spray Speed | 0.5 L/min (per nozzle, for water) |
Spray Width | 4 - 6 m (4 nozzles, 1.5 – 3 m above the crops) |
Droplet Size* |
*Droplet size may vary according to operation environment and spraying speed. |
Flight Parameters
Features
Total Weight (without batteries) | 8.8 kg |
---|---|
Standard Takeoff Weight | 22.5 kg |
Max Takeoff Weight | 24 kg (@ sea level) |
Max Thrust-Weight Ratio | 1.81 (with 22.5 kg takeoff weight) |
Power Battery | 2 x 6S LiPo (batteries of 12000 mAh, continuous discharging rate of 10C and charging rate of 1C to 2C recommended) |
Max Power Consumption | 6400 W |
Hovering Power Consumption | 3250 W (with 22.5 kg takeoff weight) |
Hovering Time |
|
Max Operating Speed | 8 m/s |
Max Flying Speed | 22 m/s |
Recommended Operating Temperature | 0 to 40℃ |
Remote Controller
Features
Model | GL690B(Japan Only), GL658C |
---|---|
Operating Frequency | 2.400 - 2.483 GHz |
Max Transmission Range (unobstructed, free of interference) |
|
EIRP | 100 mW @ 2.4 GHz |
Built-in Battery | 6000 mAh, 2S LiPo |
Charging | DJI charger |
Output Power | 9 W |
Operating Temperature Range | -10 to 40℃ |
Storage Temperature Range |
|
Charge Temperature Range | 0 to 40℃ |
Remote Controller Charger
Features
Model | A14-057N1A |
---|---|
Voltage | 17.4 V |
Rated Power | 57 W |