Naza N3 FLIGHT Controller

System-level Solution
The N3 flight controller is compatible with professional remote controllers and receivers, DJI’s Intelligent ESC, DJI GO, Lightbridge 2, Datalink Pro and iOSD. It also integrates seamlessly with DJI’s Zenmuse series of gimbals and cameras, providing instant access to a whole host of flight applications.
Compatibility with DJI Assistant 2 provides more possibilities for a multitude of industrial applications. With DJI’s Onboard and Mobile SDK, the N3 is ideal for hobbyists and professionals looking to create custom software solutions quickly and easily.

Dual IMU Redundancy and Built-in Black Box
Dual IMU redundancy means that the N3’s robust flight
control algorithm detects IMU failure during flight,
automatically switching over to a backup unit while
maintaining flight control and safety at all times.
The N3’s outstanding vibration dampening system supports a
wide range of flying platforms — from lightweight consumer
drones made for racing, to heavier industrial drones such as
the S1000+ — providing better flight performance and better
reliability. A built-in 8GB Industry Black Box automatically records every detail of the aircraft’s flight, enabling you to monitor flight data andfine-tune the aircraft in real-time. With DJI’s Assistant 2 data viewer, troubleshooting and flight performance analysis have never
been easier.

Expandable Navigation Module
The dual IMU redundancy system is upgradeable via the A3
Upgrade Kit, creating an IMU and GNSS redundant frame,
boosting overall stability and reliability. It detects external
GNSS or IMU unit failure, switching to internal units seamlessly
to ensure consistently high-performance and safety.

SDK Compatibility, More Possibilities
Compatibility with DJI’s Onboard and Mobile SDK means the N3 is ideal for hobbyists and professionals looking to create custom
software solutions with ease. The N3 works with DJI Assistant 2, providing more possibilities for a host of industrial applications.
Software Support
Compatibility with DJI GO and DJI Assistant 2 allows live viewing of the video feed, battery status, redundancy status, signal
strength and more. Shutter speed, ISO, aperture, and focus can be controlled when using DJI’s Zenmuse X5 and X5R cameras.

Specifications

General
Supported Multi-rotor
Quadcopter: I4，X4;
Hexacopter: I6，X6，Y6，IY6
Octocopter: X8，I8，V8
Supported ESC
400Hz frequency, DJI Intelligent ESC with feedback
Recommended Battery
3S to 12S LiPo or DJI Smart Battery
Recommended Radio
Lightbridge 2, S-BUS or D-BUS
Other DJI Products Supported
DJI GO, iOSD, D-RTK, DATALINK PRO, Zenmuse serial, Ronin serial, X3, X5, X5R, Z15, Ronin-MX, DJI propulsion systems, S900, S1000, S1000+, etc.
Assistant Software System Requirement
Windows 7 /8 /10 (32 or 64 bit) Mac OS
Built-in Functions
Sport mode, with adjustable maneuverability
Intelligent Flight Modes
Dual IMU redundancy
Built-in 8GB Sdcard for data recorder as Blockbox
External SBUS receiver
Lightbridge 2 receiver
8 function channels (including 4 configurable direction channels)
SDK
Protection Function
Motor Fail Protection(Minimum 6 axis)
Propulsion system Protection(Motor Overload)
Smart Return To Home(RTH)
Low Battery Protection, support Smart RTH(only for DJI Smart Battery)
Low Battery Voltage Protection
No Fly Zones Flight Performance
Hovering Accuracy
Vertical: ±0.5m Horizontal: ±1.5m
Maximum Wing Resistance
<10m/s
Max Yaw Angular Velocity
150 deg/s
Max Tilt Angle
35°
Max Ascending Velocity
5m/s
Max Aecending Velocity
4m/s SDK
SDK
Mobile SDK
Onboard SDK
SDK Port
API/CAN2 Extending Function
PWM I/O Ports
F1-F4 ports for output F5-F8 ports for I/O function
Data Storage
Built-in data recorder
Intelligent Flight Modes
Home Lock and Course Lock. (with Lightbridge 2) Point of Interest, Waypoints,
Remote Parameter Adjustment
Knob with sbus Receiver enabled by DJI ASSISTANT2 It can be realized in DJI GO APP With Lightbridge 2
Assistant software
DJI ASSISTANT 2, support simulator support MAC OS & windows
iOSD
iOSD Mark II, iOSD mini
Zenmuse Gimbal&Camera
z15, ronin-mx, X3, X5,X5R
Propulsion systems
all Hardware
Weight
Total： 132g
MC： 46g
GNSS：37g
PMU：36g
LED：13g
Power Consumption: Normal 3.3wMax 4.8w
Size
Controller: 57.9mm x 39mm x 17mm
GNSS-Compass: 50mm (diameter) x 12.2mm
PMU: 40mm x 28.2mm x 11.2mm
LED: 25mm x 25mm x 6.3mm
Operating Temperature -10°C to +45°C