RF Power Meter V2


New

RF Power Meter V2

In stock
can be shipped within 1 days

106.00
The price includes VAT
Delivery weight: 150 g


RF Power Meter V2

 

Every FPVers Toolbox Needs One…

FPV is made possible thanks to two RF links, a control link, and a video link. Without an RF Power Meter, a pilot has no way to test these critical RF links.

Test equipment for microwave (GHz) links is not cheap. ImmersionRC changed this several years ago and provided our ‘Power Meter v1’ to the FPV community. The v2 is the result of listening to customer feedback. We added an internal battery an internal attenuator and a few features that every FPVer needs.

 

Accurate RF Power Measurements

Is the latest whiz-bang hype-train VTX really as good as the datasheet claims? Does it really emit 25mW on all race channels? Does it still emit 25mW 30 minutes later?

The RF Power Meter v2 allows these questions, and much more to be answered.

Back in the early days of FPV racing ImmersionRC pioneered low-power racing, where everyone runs 25mW. This became a world-standard within a few short months and continues to be the standard today. The Power Meter v2 gives you the measurement tool that you need to test transmitters before you get surprised at the next race.

 

Touch-Free Race Compliance

Are you ready to test your video transmitter before the hammer comes out?

With the included stubby dipole, the RF Power Meter v2 is all that you need to perform a rough power test on any FPV platform, even without unscrewing it’s antenna.

Calibrate the meter on a ‘known good’ platform, and walk down the start grid testing each quad ready to race. Quads accidentally set on high power (hammer-ready), or those with hardware/cable/connector/antenna problems emitting a few micro-watts are identified before the first gate.

We call this ‘Scully Mode’ for a good reason. Joe Scully, the best FPV MC in the business, perfected this test technique to ensure successful race meets on all four corners of the globe.

 

PRODUCT SPECIFICATIONS:

  • Power Level: -20dBm up to +30dBm

  • Calibrated Frequencies: 35, 72, 433, 1200, 2400, 5600-6000MHz in 50MHz steps

  • Accuracy: +/- 0.5dB

  • Attenuator: 30dB (Internal)

  • Battery: 3.7V Lithium Ion cell, 10440 size, 600mAh

  • Current Consumption: ~35mA

  • Battery Life: ~8 hours

  • Auto Shutdown: 5 minute timeout

  • Charging: Micro USB cable

  • Display: OLED, 128×64 pixels, monochrome

  • User Input: Joystick

  • Interfaces: USB, power control via CDC

  • Antenna: 5.8GHz ‘Sniffer Antenna’ (linearly polarized ~2dBi dipole)

  • Adapter: Male to Male SMA adapter

We also recommend

EZUHF Tx + Antena
169.00 *
Delivery weight: 150 g
*
The price includes VAT

Browse these categories as well: Immersionrc, LRS, New items