A few years after the appearance of the
mc-24, which has proven itself a
thousand times over, the mc-32 takes
off at Graupner.
With proven functions and new ideas, it
comes in a slick black design that looks
great with the all-aluminium frame -
which, by the way is no design gag but
a supporting element of the overall
structure.

Functions and innovations:

• Integrated Graupner HoTT 2.4 GHz transmission system
• Voice and music output via built in speaker or headphone jack or Bluetooth® v2.1+ EDR
• Aluminium trim wheel and aluminium side levers
• Aluminium stick mechanic parts with stick and 3-function-stick switches
• Simple, extremely fast binding with model-memory-dependent telemetry
• Range test and warning function
• Low-voltage warning
• Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V)
• Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed simply
• Binding of any number of receivers for channel expansion (max. of 32 channels)
• Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms (only digital servos!)
• Maximum immunity to interference through optimised frequency hopping and broad channel spread
• Intelligent data transmission with correction function
• Extremely fast rebinding, even at max. distance
• Telemetry analysis in real time
• Transmitter display in real time
• In addition, the telemetry data can be displayed optionally with the SMARTBOX Over 200 systems can be used simultaneously
• In the HoTT version bidirectional communication between transmitter and receiver as well as the fastest transmission rates of 10ms for extrem reactions.
• Additional HoTT features of the mc-32:
• Super-fast response time thanks to the use of the fast main processor for data transmission
• Micro-SD card to store telemetry data and for other functions
• Future-proof thanks to the update capability via USB interface
• The included LiIo battery has a capacity of 6000 mAh, making it possible to reach extreme flight times and reduce charging processes.
• Wireless teacher-pupil system or optionally via cable to the DSC socket
• Modulation switchable via software enabling you to switch from, for example, Weatronic (EXT. PPM) to HoTT at the push of a button
• Connections for Weatronic module.
• iFS and Weatronic can be retrofitted.
• 5 different languages (German, English, later French, Italian, and Spanish) possible via software update. For availability of the respective language, see Download area.
• 80 model memories and other storage options on the SD card
• 8 switches/keys including 2 3-stage-switches, 3 2-stage-switches, 2long keys, 2 safety switches already installed
• Swashplate limiter: This function limits the angle of inclination of the swashplate and prevents it from striking other mechanical parts during simultaneous full roll and pitch-axis manoeuvers in 3D helicopter operations
• Digital trimming by scroll wheel, can be set either for a specific flight phase or globally
• Zeroing of the digital trimming by simply pressing the scroll wheels
• Auto-trim function When trimming fixed-wing or helicopter models, the current stick positions are stored in the trim memory at the push of a button. (Hit the switch, get the model on the »straight and level«, and release the stick. The correction is then displayed »smoothly« when the stick is pulled back.)
• CH.-1-switchover for braking / electric motor: This expansion of flight phase programming makes the switchover child‘s play. The pilot decides at which stick position (forward/ back) the motor is switched off or the airbrakes are retracted.
• Maximum of 16 proportional control functions
• Simplified assignment of control elements, such as stick, external switch, proportional control, and trim lever as control functions.
• Future-proof thanks to updatable, fast, 32-bit operating system with a modern flash memory
• Blue backlit MULTI-DATA-GRAPHIC LCD monitor with significantly improved readability in difficult lighting conditions
• CONVENIENT MODE SELECTOR for simple switchover of operating modes 1 - 4 (e.g. throttle left/throttle right)
• 12 mixers, freely programmable for fixed-wing models and helicopters with freely selectable input and output functions, including 4 curve mixers with the new 8-point-curve technology; curve values are simple to set and adjust for a maximum of 8 points for throttle, pitch, tail rotor, or other nonlinear setting paths. The processor in the CPU uses a sophisticated polynomial approximation method to calculate an ideal, correctly rounded MPC (multi-point curve) mixer curve.
• Shifting of the curve mixer points is possible in both axes with the control
• 8 flight phase programs can be adjusted individually for each model and assigned names; the switching time can be set separately
• SUPER SERVO menu with a perfect overview of all servo setting data and simple correction of parameters for 4 levels (turning direction, center position, bilaterally separate servo paths, and bilaterally separate travel limits for 16 servos with a total of 96 setting options)
• SUPER-DUAL-RATE, EXPO, and EXPO/DUAL-RATE menu with 36 possible setting variants, for 3 servo functions and 8 flight phases.
• Practical, optimised multi-function menus for fixed-wing and helicopter models. Entering the number of aileron and cambered flap servos automatically programs all the required mixer functions in the multifunction fixed-wing menu. Differential aileron mixer, butterfly mixer, dual-flap mixer, automatic gyro set function and additional special functions
• Helicopter swashplate mixer For 1, 2, 3, or 4-point linkage.
• Selectable cycle ltime of 10 ms, 20 ms, 30 ms, or 40 ms, depending on receiver and operating mode
• Convenient timer menu. 8-stopwatch system, alarm timer, countdown timer, lap counter, et cetera. 2 times and 1 lap time can be displayed simultaneously in large characters.
• Stopwatch with history: In addition to the lap counter, there is a Time 1, which records the power-on times and a Time 2, which records the switched-on and switched-off times separately.

Set contents:

Graupner HoTT mc-32 microcomputer transmitter with built-in 1S6P 6000 mAh Lilo transmitter
battery, Graupner HoTT 2.4-GHz FHSS module with micro SD card slot for storage of telemetry
data, and earphone connection, USB connection,Bluetooth® v2.1+ EDR Modul, Graupner HoTT GR-32 16-channel receiver, charger for transmitter battery, update cable, neckstrap made of 100% nylon and pad made of 100% polyester, embroidery made of 100% cotton, aluminium transmitter case, two 3 position stick switches

General HoTT features:

• Simple, extremely fast binding
• Range test and warning function
• Low-voltage warning
• Extremely broad receiver operating voltage range from 3.6 V to 8.4 V (functional to 2.5V)
• Failsafe, free channel allocation (channel mapping); mixer functions and all servo settings can be programmed simply with internal telemetry
• Binding of any number of receivers for channel expansion (max. of 32 channels)
• Up to 4 servos can be controlled simultaneously as a block with a signal repetition time of 10 ms (only digital servos!)
• Maximum immunity to interference through optimised frequency hopping and broad channel spread
• Intelligent data transmission with correction function
• Extremely fast rebinding, even at maximum distance
• Telemetry analysis in real time
• Over 200 systems can be used simultaneously
• Future-proof through update capability via USB interface or MicroSD card

NEW:

Reliability:

FHSS, frequency hopping via up to 75 channels

Maximum protection against interference through optimised frequency hopping, broad channel spread, and aerial diversification.

Intelligent data transfer with correction function

Extremely high range

Range test and warning function

Low voltage warning

Extremely broad receiver operating voltage range of 3.6 V to 8.4 V (functional to 2.5 V)

Numerous failsafe functions

Key lock function against unintentional alteration of menus


Precision:

Shorter response times can be set (10ms period)

No additional delays due to module processors. the entire hopping management is done directly by the 32-bit main processor.

Synchronous servo travel due to simultaneous control of the servo outputs is possible in blocks of 4


Pilot feeling:

Extensively delay-free control reactions due to direct processing

Telemetry analysis in real time

Optional speech output of the timers, telemetry data, and warnings via headphone output

Repeat function and continue function for voice output can be programmed via freely assignable switches

Pre-selection of voice output to be used

Separately adjustable volume for beeps and voice output

Integrated telemetry display with 8 x 21 characters or 128 x 64 pixels, optionally in test or graphic form

Duration of display illumination : ALWAYS, 30s,.60s, 90s, 120s

Micro-SD card slot for storage of telemetry data, similar to a black box and in addition to the model memories

PC software for analysis or display of the telemetry data via download

Buzzer signal at the highest receiver output for L/S function, satellite receiver, simulators, paddle-less stabilisation systems, et cetera programmable

Model-memory-dependent binding, except for copied model memories

Wireless teacher/pupil function

Numerous flight phases programmable

Swashplate limiter

Motor off function

Numerous fixed-wing and helicopter mixers


Other characteristics:

Simple and extremely fast binding

Free channel allocation (channel mapping), transmitter and receiver mixing functions, as well as all servo settings can be programmed simply

Binding of any number of receivers for channel expansion (maximum of 16 channels). The last receiver bound sends the telemetry data.

Future-proof due to update function via PC interface