Sky-hero ANAKIN NAKED FRAME 6"

just is a frame, electro. not incluid

 

INCLUDED:

CARBON PARTS:

Full 3K carbon 1,2mm main and side frames 15mm carbon tube arms.

PLASTIC PARTS:

Polycarbonate high pressure injected main parts.

VARIOUS:

Polyamid injected platic canopy.

OPTIONAL PARTS

• Canopies
• Side Frames
• Alluminium parts
• Kit GP
• Sticker sets

 

28mm

SIZE MAX MOTORS

6'

SIZE MAX PROPPELLERS

...

SIZE UNFOLDED

135g

WEIGHT

280mm

DIAGOLAL BETWEEN MOTORS

 

 

 

 

•  

•  

Anakin is the youngest ultra fast bad kid of the Sky-Hero family. He has been conceived mainly for fighting in FPV race. Its unique side frame system makes it highly customizable allowing to fine tune your race settings almost to infinity.

Just like our other BIND READY models, Anakin is suitable for both experts and beginners, giving anyone the opportunity to fly within minutes.

Chasis ZMR mkII 250

Chasis KitCopter Tetri-X 230

Sky-Hero Optional lower frame «Big lipo» little spyder

Frame KitCopter Urraca 210

Integrated PCB Micro-Quad (KIT)

This tiny yet brilliantly designed Micro-Quad features an integrated PCB frame, Simply bolt on the motors then solder your choice of 6amp ESC directly to the frame!

An integrated power distribution system is also included making for one of the neatest electronics installs around. All mounting hardware and frame components are included in the kit. All you will require to have this little monster in the air is four Turnigy T1811-2900kv motors, four 6Amp ESCs, a set of 5x3 Micro-quad props (2 Clock wise and 2 counter clockwise) an 800mah 2s 7.4v Lipoly battery,

Features:
Light weight design.
Integrated PCB for component installation.
Included a full set of frame and mounting hardware. 

Specs:
Flying Weight: 145g (not including RX and battery)
Width: 250mm
Height: 85mm

Required:
4 x Turnigy T1811-2900kv
4 x 6Amp ESC
4 x 5x3 Prop (2CW & 2CCW)
1 x 800Mah 2s 7.4v Lipoly battery
16 x M2x8 Bolts (for motor)
16 x M2 lock nuts (for motor)
Your own radio and 4 channel receiver.

Vortex Metal Motor Mounts (2204)

Frame Theory X 195 Kit

The Blade® Theory™ X Frame Kits are designed for durability, simplicity, and speed. Constructed exclusively for racing, the assembled kit containing composite plates, and all recommended equipment has a flying weight of only 400-450g. The airframe features multiple motor mounting holes to fit a variety of motors and the cover plate includes cutouts for a variety of connectors and video transmitter as well as the XT-60. The camera mount is highly adjustable and can angle from 45 to 90 degrees. Advanced FPV pilots and those experienced in building quadcopters from scratch, will appreciate the compact design featuring enough room for all electronics and a GoPro camera. Its true X design provides an excellent feel in the air with more agility, the opportunity to hit top speeds, and the ability to reach the finish line first.

Theory X 170 (4”) Advantages
The advantages to using a smaller, 4” propeller racer is agility. A smaller profile means you can turn and corner much faster around flags and gates in a race, a significant advantage over other sizes in a tighter, more technical race course.

Theory X 220 (6”) Advantages
The larger profile of this frame is built to host 6” propellers which produce much more thrust than 4” and 5” setups. While not as agile in corners as the 4”, this setup will blaze past the competition in the straightaways with a much higher top speed.

Simplicity in Design
The compact frame design is open enough to place electronics easily within a condensed profile.

Easy Mounting
The frame has multiple motor mounting holes to fit a variety of motors with 16-19mm motor mount support.

Designed for Video
The ingenious top stack was designed to hold a GoPro Hero 3 or 4 with a single strap allowing you to have a race airframe with the ability to run an HD camera.

Race Your Way
The simple FPV camera mount allows for angles up to 90 degrees allowing you to choose just how fast you want to go.

Exceptional Durability
Composite airframe featuring a solid 4mm main plate provides exceptional durability while maintaining a lightweight profile

ImmersionRC  Vortex Metal Arm Mount Upgrade

Precision CNC milled aluminum arm clamps, designed for the hard-core Vortex racer.

After upgrading with this kit, the Vortex arms no longer fold, but instead are very rigidly mounted to the frame. 

Includes:

- 8x Anodized, CNC Milled, Top Clamp

- 8x Anodized, CNC Milled, Bottom Clamp

- 18x Screw, M2x16

- 18x Screw, M2x5

ABS Hard Case for Mini Quadcopter 250 Class