12*4.2 Self tightening black props (yellow strips)

300 9" White Props (Need Nuts to Fix)

Representing the state of the art in this industry, the 9.4*4.3“ rotor offers an approx. 20% ~ 25% improvement over the 8.0*4.5” rotor without the need of using a heavier motor, making the 350 ~ 450 model quad copter achieve a significantly higher lift and thus more powerful to carry a camera and gimbal setup (FPV). The rotors are carefully balanced dynamically, you will never be bothered by jello effect from your airborne rolling shutter camera. The low inertial design enables your flight controller to use a much higher gain value to achieve a higher stability and maneuverability all at once.

El Takyon Updater está diseñado para los ESC de la serie Takyon. Conecte el ESC a un ordenador a través del Takyon Updater para actualizarlo o configurarlo.

Especificaciones
Dimensiones: 30.6 mm × 15.5 mm × 5.0 mm
Peso: 1.7 g
Temperatura de funcionamiento de: -10°C a 40°C (de 14°F a 104° F)

DJI 15A (ESC) 3-4 Lipo

Current: 15A OPTO
Signal Frequency: 30Hz - 450Hz
Battery: 3S ~ 4S LiPo

PROP V2 / PRO DJI Inspire 1 1345T

94 X 50 Phantom 2 V2 Vision Propeller Self-Tightening (1CW + 1CCW)

New prop for phantom v2

Snail - ESC Programmer

The Snail ESC programmer is compatible to the Snail 430-R Racing ESC. By connecting the 430-R ESC to your PC using Snail ESC Programmer, it is possible to set parameters and update firmware through DJI Assistant 2.

DJI Phantom 2 Vision FC40 9443 Camouflage Propeller CW/CCW

Snail -7027S Quick-release Propellers

Snail -6048-3D Propellers

The Snail series includes a number of propellers, optimized for everything from racing to 3D flying to aerial imaging. All Snail propellers feature a new quick release propeller (excluding the 6048-3D Propeller) – a first for racing drones. Racers can swap propellers in seconds, without tools, because in a race every second counts. Every propeller’s hub structure has been fully tested for strength so racers can fly with confidence. There is also a standard hub version of the 5048S Tri-Blade propeller, the 5048, that can fit on other motors.

4S LiPo Recommended:
5048S Tri-Blade Propeller: Racing - Quick-Release Hub; Max Thrust 1320g; Power loading 6.2g/w
5048 Tri-Blade Propeller: Racing - Standard Hub; Max Thrust 1320g; Power loading 6.2g/w
5024S: Smooth Control; Max Thrust 1131g; Power loading 6.1g/w

3S LiPo Recommended:
6030S: Beginner; Max Thrust 896g; Power loading 7.1g/w
7027S: Aerial Imaging; Max Thrust 1148g; Power loading 8.1g/w
6048-3D: 3D Flight; Max Thrust 701g; Power Loading 5.6g/w

*Above power loading data was acquired at 150g per rotor