Home
PRINCIPAL PAGE
My Account
Switch country/language: España (Español) Switch country/language: United Kingdom (English) Switch country/language: United States (English)
Contact information

DJI Store Madrid & Support Center StockRc

DJI Store Madrid & Support Center Stockrc

        dji_s

9:00-14:00 and 16:30-19:30

Phone: 0034 91 851 20 96

New items New items
DJI 2024 Offers DJI 2024 Offers
Open Box Open Box
DJI Support Center DJI Support Center
Drone Technical Inspection Drone Technical Inspection
DJI_Power DJI_Power
DJI AVATA 2 DJI AVATA 2
DJI RS 4 DJI RS 4
DJI_DOCK_2 DJI_DOCK_2
Mini_4_PRO Mini_4_PRO
Osmo Pocket 3 Osmo Pocket 3
Osmo_Action_4 Osmo_Action_4
DJI_Air_3 DJI_Air_3
DJI Inspire 3 DJI Inspire 3
DJI_Mavic_3 DJI_Mavic_3
DJI Mavic 3 Enterprise DJI Mavic 3 Enterprise
DJI FlyCart 30 DJI FlyCart 30
DJI_Action_3 DJI_Action_3
DJI Mic DJI Mic
DJI_OM_6 DJI_OM_6
DJI_AVATA DJI AVATA
DJI Mini 3 Pro DJI Mini 3 / Pro
DJI RS 3 DJI RS 3
DJI_Air_2S DJI_Air_2S
DJI Mini 2 DJI Mini 2
Mavic Air 2 Mavic Air 2
DJI Mini SE DJI Mini SE
DJI FPV Drone DJI FPV Drone
Tello Tello
DJI Pocket 2 DJI Pocket 2
DJI Action 2 DJI Action 2
DJI OM 5 DJI OM 5
DJI OM 4 DJI OM 4
Ronin 4D Ronin 4D
Ronin RS 2 / RSC 2 Ronin RS 2 / RSC 2
RoboMaster RoboMaster
DJI M30 DJI M30
Matrice 350 RTK / 300 RTK Matrice 350 RTK / 300 RTK
Mavic 2 Enterprise Mavic 2 Enterprise
P4 Multispectral P4 Multispectral
Phantom 4 RTK Phantom 4 RTK
DJI Agras DJI Agras
Parachutes Systems Parachutes Systems
DJI Mavic 2 DJI Mavic 2
Mavic Mini Mavic Mini
DJI Spark DJI Spark
DJI Mavic DJI Mavic
DJI Inspire 2 DJI Inspire 2
Phantom 4 Phantom 4
DJI Inspire 1 / X5 DJI Inspire 1 / X5
DJI Mavic Air DJI Mavic Air
DJI Phantom 3 DJI Phantom 3
DJI FPV DJI FPV
DJI Goggles DJI Goggles
DJI Osmo Action DJI Osmo Action
DJI Osmo Pocket DJI Osmo Pocket
Osmo Mobile 3 Osmo Mobile 3
DJI Osmo DJI Osmo
DJI Osmo Mobile Series DJI Osmo Mobile Series
DJI RONIN 2 DJI RONIN 2
DJI Ronin-SC DJI Ronin-SC
DJI Ronin S DJI Ronin S
DJI RONIN / M / MX DJI RONIN / M / MX
DJI Matrice 210-200 / V2 Matrice 210-200 / V2
Dji Matrice 600 Dji Matrice 600
DJI Wind Series DJI Wind Series
portable power portable power
Dronetag Dronetag
Underwater Drone Underwater Drone
Payload SDK Payload SDK
UgCS__Sistemas_integrados UgCS__Sistemas_integrados
Promociones enterprise Promociones enterprise
Enterprise + Maintenance Enterprise + Maintenance
DJI Zenmuse XT 30 Hz Dji zenmuse XT
DJI Software DJI Software
Hasselblad Hasselblad
DJI Product DJI Product
3drobotics / ProfiCNC/HEX 3drobotics / ProfiCNC/HEX
fpv glasses fpv glasses
Race Drone Race Drone
360º protective cage 360º protective cage
All For Multirotor All For Multirotor
Other Multicopters Other Multicopters
MultiRotor RTF Prof. MultiRotor RTF Prof.
Fpv Systems Fpv Systems
Flight Case Flight Case
Gimbal Brushless Gimbal Brushless
Suitcase sales Suitcase sales
Planes Planes
SK8 CAM SK8 CAM
Elistair solución drone cautivo Elistair solución drone cautivo
Lidar Cameras Lidar Cameras
Emisoras_Banda_Aerea Emisoras_Banda_Aerea
Switch country/language: España (Español) Switch country/language: United Kingdom (English) Switch country/language: United States (English)

DJI Madrid & OFFICIAL Support Center 3drobotics / ProfiCNC/HEX Power Distribution Board 180A – X8

Print

DJI Madrid & OFFICIAL Support Center Race Drone Micro Cuad Controller M8N GPS for CC3D

Print

DJI Madrid & OFFICIAL Support Center 3drobotics / ProfiCNC/HEX 3DR Micro OSD (Mavlink Protocol, compatible with Pixhawk)

Print

DJI Madrid & OFFICIAL Support Center 3drobotics / ProfiCNC/HEX Pixhawk I2C Splitter3DR uBlox GPS with Compass Kit

Print

DJI Madrid & OFFICIAL Support Center 3drobotics / ProfiCNC/HEX Hexacopter Power Distribution Board

Print

DJI Madrid & OFFICIAL Support Center 3drobotics / ProfiCNC/HEX PH2.1 Cable Set

Print

DJI Madrid & OFFICIAL Support Center All For Multirotor Tx/Rx Systems & Parts Frsky Air Speed Sensor- ASS-70

Print

DJI Madrid & OFFICIAL Support Center 3drobotics / ProfiCNC/HEX Power Brick Mini

Print

DJI Madrid & OFFICIAL Support Center 3drobotics / ProfiCNC/HEX Buzzer cable and USB connection for Pixhawk2.1

Print

DJI Madrid & OFFICIAL Support Center 3drobotics / ProfiCNC/HEX Minim OSD with plastic shell

Print
21 - 30 of 47 results
New

Power Distribution Board 180A – X8

Be the first to rate this product

In stock
can be shipped within 1 days

49.00 €
The price includes VAT
Delivery weight: 50 g


Power Distribution Board 180A – X8

The power distribution board is the most reliable solution for connecting motors through ESCs. The Airbot Systems board can connect up to 8 motors and can support up to 180 amperes.

Documentation – Download

 

The Airbot Systems power distribution board is a reliable solution to connect ESC, it allows reducing the wiring to a really structured and clean appearance.

Dimensions of the board allow to install the autopilot directly on it.
The distribution board is compatible with many flight controllers, such as the Pixhawk 2.1 (a location with mounting holes is present on the PDB), but also with other systems, such as DJI flight controllers.

TECHNICAL SPECIFICATIONS :

Dimensions :
Mounting holes dimensions :
Weight :
PWM Distribution:
Autopilots compatibility :

Max current :
Number of motors :
Batteries tabs :
Accessories tabs :

114 x 115 mm

65 x 85 mm
65g (0,14 lbs)
Yes (8 signals)
Pixhawk 2.1, Pixhawk, APM, DJI, others…
180A
8 motors max
2 batteries in parallele
4 (2 on top/2 on bottom)

Browse this category: 3drobotics / ProfiCNC/HEX
New

M8N GPS for CC3D

Be the first to rate this product

In stock
can be shipped within 1 days

49.00 €
The price includes VAT
Delivery weight: 150 g


M8N GPS for CC3D

New Ublox M8N 6H GPS FOR CC3D

 

Features

- Quick satellite searching, only need 10s to find 6 satellite in open space

- Built-in compass, refresh rate up to 10GHz

- Support GPS+BD+SBAS, or GPS+GLONASS+SBAS

 

Product Details

A new generation Ublox GPS NEO-M8N,with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy,support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol and mode or more.

 

GPS Chip parameters:

 Receiver type 72-channel u-blox M8 engine

 GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1

 SBAS L1 C/A: WAAS, EGNOS, MSAS

 Galileo-ready E1B/C (NEO-M8N)

 Nav. update rate1 Single GNSS: up to 18 HZ

 Concurrent GNSS: up to 10 Hz

 Position accuracy2 2.0 m CEP

 Acquisition2 Cold starts: 26 s

 Aided starts: 2 s

 Reacquisition: 1.5 s

 Sensitivity2 Tracking & Nav: –167 dBm

 Cold starts: –148 dBm

 Hot starts: –156 dBm

 Assistance AssistNow GNSS Online

 AssistNow GNSS Offline (up to 35 days)3

 AssistNow Autonomous (up to 6 days)

 OMA SUPL & 3GPP compliant

 Oscillator TCXO (NEO-M8N/Q),

 Crystal (NEO-M8M)

 RTC crystal Built-In

 Noise figure On-chip LNA (NEO-M8M). Extra LNA for

 lowest noise figure (NEO-M8N/Q)

 Anti jamming Active CW detection and removal. Extra

 onboard SAW band pass filter (NEO-M8N/Q)

 Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N)

 Supported antennas Active and passive

 Odometer Travelled distance

 Data-logger For position, velocity, and time (NEO-M8N)

 

Operating temp. –40° C to 85° C

 Storage temp. –40° C to 85° C (NEO-M8N/Q)

 –40° C to 105° C (NEO-M8M)

 RoHS compliant (lead-free)

 Qualification according to ISO 16750

 Manufactured and fully tested in ISO/TS 16949 certified production sites

 Uses u-blox M8 chips qualified according to AEC-Q100

 

Supply voltage 1.65 V to 3.6 V (NEO-M8M)

 2.7 V to 3.6 V (NEO-M8N/Q)

 Power consumption4 23 mA @ 3.0 V (continuous)

 5 mA @ 3.0 V Power Save Mode

 (1 Hz, GPS mode only)

 Backup Supply 1.4 to 3.6 V

NEO-M8N-0 u-blox M8 Concurrent GNSS LCC Module,

 TCXO, flash, SAW, LNA,

 

 Timepulse Configurable 0.25 Hz to 10 MHz

Browse these categories as well: Micro Cuad power system and controller, OSD Telemetry GPS, Planes, Accesories FPV, 3drobotics / ProfiCNC/HEX
New

3DR Micro OSD (Mavlink Protocol, compatible with Pixhawk)

Be the first to rate this product

In stock
can be shipped within 1 days

39.00 €
The price includes VAT
Delivery weight: 100 g


3DR Micro OSD (Mavlink Protocol, compatible with Pixhawk)

Optimized based on 3DR mini OSD, all functions in Mini OSD were kept, circuit is optimized, smaller in size and ligher in weight.

Includes:
1 x 3DR Micro OSD  main module
3 x cables

https://code.google.com/p/minimosd-extra/

Browse this category: 3drobotics / ProfiCNC/HEX
New

Pixhawk I2C Splitter3DR uBlox GPS with Compass Kit

Be the first to rate this product

In stock
can be shipped within 1 days

39.00 €
The price includes VAT
Delivery weight: 100 g


Pixhawk I2C Splitter

Expand Pixhawk's I2C port with this splitter module. The splitter features five four-position DF13 connectors (one to connect to Pixhawk and four additional I2C ports). Use the provided cables to connect your airspeed sensor, magnetometer, external LED, or other module to Pixhawk.

Browse this category: 3drobotics / ProfiCNC/HEX
New

Hexacopter Power Distribution Board

Be the first to rate this product

In stock
can be shipped within 1 days

39.00 €
The price includes VAT
Delivery weight: 100 g


Hexacopter Power Distribution Board

The Hexacopter PDB can be used with any frame. It distributes the power from the flight battery to six ESC's to power the motors. Now comes pre-assembled! No need to solder connectors or wires! Now with an XT60 battery connector.

PDB kit includes:

  • PDB
  • APM cable
  • APM power cable
  • All necessary headers.
  • 6" 14AWG red/black cable for the flight battery.
  • 6 female Deans connectors/ 1 male XT60 connector.
  • Shrink tubing for flight battery cables

Board layout and schematic.

Browse this category: 3drobotics / ProfiCNC/HEX
New

PH2.1 Cable Set

Be the first to rate this product

Currently unavailable

Notify on availability
34.00 €
The price includes VAT
Delivery weight: 150 g

PH2.1 Cable Set

 

Cables for accessories are JST to DF13 cables which are compatible with old pixhawk accessories, such as Telemetry, Power Brick or GPS

It contains:

TELEM Cable * 2

POWER Cable * 2

I2C Cable * 1

BUZZER Cable * 1

MICRO USB Cable * 1

GPS1 Cable(with saftey switch) * 1

GPS2 Cable * 1

 

Browse this category: 3drobotics / ProfiCNC/HEX
New

Frsky Air Speed Sensor- ASS-70

Be the first to rate this product

In stock
can be shipped within 1 days

33.90 €
The price includes VAT
Delivery weight: 600 g


Frsky Air Speed Sensor- ASS-70

FrSky Smart Port Air Speed Sensor ASS-70 is designed for FrSky Smart Port enabled system, and can provide Airspeed Data for your entire flight.

 

Compatibility    

FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.

Model    

ASS-70

Dimension    

Circuit Board: Weight 7 g, dimensions 33.29×22.26×12.55mm

Pitot Tube: Weight 4 g, length 101mm, diameter 2.6 mm

Pitot Tube Hose: Silicon, clear, 3 feet (1 meter), 2.2mm ID, 3.8mm OD

Operating Voltage Range    : DC 4 -10 V

Operating Current: 20mA@5V

Measurement Range    :  0~270km/h  (0~167.7mile/h )

 


MANUAL

Browse these categories as well: Tx/Rx Systems & Parts, FrSky, 3drobotics / ProfiCNC/HEX
New

Power Brick Mini

Be the first to rate this product

In stock
can be shipped within 1 days

Offre 38.00 €
33.00 €
You save 13 %
The price includes VAT
Delivery weight: 10 g


Power Brick Mini

 

 

Up to 8s 30A continuous

Browse this category: 3drobotics / ProfiCNC/HEX
New

Buzzer cable and USB connection for Pixhawk2.1

Be the first to rate this product

In stock
can be shipped within 1 days

29.90 €
The price includes VAT
Delivery weight: 100 g


Buzzer cable and USB connection for Pixhawk2.1

Browse this category: 3drobotics / ProfiCNC/HEX
New

Minim OSD with plastic shell

Be the first to rate this product

In stock
can be shipped within 1 days

29.00 €
The price includes VAT
Delivery weight: 50 g


Minim OSD with plastic shell Mavlink Support APM APM 2.5 2.6 RC Flight Controller FPV

*Note: This is not an original 3DR brand product.

Manual MinimOSD

Description: On-Screen Display Ardupilot Mega MinimOSD Rev. 1.1 OSD diy drones APM2  APM2.5 APM2.6 APM has an companion OSD board called MinimOSD. It reads all the MAVLink data in the APM telemetry stream and overlays it on the video stream if you're using an on-board camera and wireless video transmitter. This is useful if you're flying in First Person View (FPV) mode or don't want to use a laptop at the field to see your telemetry data in the Mission Planner. Instructions on connecting and using the MinimOSD board via the APM telemetry port are here. Connection photos with APM 1 and APM 2 are below. Important note: You cannot connect use the OSD when your APM 2. is also connected via USB (they share the same port). Make sure you disconnect your USB cable from the APM 2 board before attempting to use the OSD.
 
Browse this category: 3drobotics / ProfiCNC/HEX
21 - 30 of 47 results
Contact information
Delivery and payment information
Terms and Conditions
Privacy policy
Cookies policy