DJI RONIN handheld gimbal system with case
Ronin is a 3-Axis Stabilized Handheld Gimbal System, which has been developed for the cinematographer with pro-grade build quality keeping up with the demands of everyday use and aerial film making in professional environments. Here I attached our product information for you to have a better study.
Ronin can mount cameras which are listed below:
|
Sony NEX7
|
Panasonic GH2
|
Panasonic GH3
|
|
Canon 6D
|
Canon 7
|
Canon 5DMKII
|
|
Canon 5DMKIII
|
Nikon D800
|
Black Magic Pocket Cinema Camera
|
|
Black Magic Cinema Camera
|
Canon 1Dc
|
Canon C100
|
|
RED Epic
|
Canon C300
|
Canon C500
|
Here are videos shoot by DJI Ronnin
1.Brainstorm: A Short Film Shot on the DJI Ronin
Youtube: https://www.youtube.com/watch?v=b333dB_cOvg
Youku: http://v.youku.com/v_show/id_XNzAyMjc4NTc2.html
Ronin is a 3-Axis Stabilized Handheld Gimbal System, which has been developed for the cinematographer with pro-grade build quality keeping up with the demands of everyday use and aerial film making in professional environments. Here I attached our product information for you to have a better study.
Include:
Ronin
Case trip
Tx 5.8Ghz for second operator
KEY FEATURES
l 3-AXIS STABILIZED GIMBAL SYSTEM
l SUPPORTS A MULTITUDE OF CAMERAS & LENSES (FROM MICRO FOUR-THIRDS TO RED EPIC SIZED)
l SIMPLE 5 MINUTE SETUP & BALANCE
l BUILT-IN TOOL-LESS BALANCE ADJUSTMENT SYSTEM
l BUILT-IN RECEIVER & REMOTE CONTROL AVAILABLE
l MOBILE BLUETOOTH ASSISTANT SOFTWARE
l BASED ON DJI ZENMUSE TECHNOLOGY
l GIMBAL TUNING STAND
l FIRMWARE UPGRADABLE
Ronin can mount cameras which are listed below:
|
Sony NEX7
|
Panasonic GH2
|
Panasonic GH3/GH4
|
|
Canon 6D
|
Canon 7
|
Canon 5DMKII
|
|
Canon 5DMKIII
|
Nikon D800
|
Black Magic Pocket Cinema Camera
|
|
Black Magic Cinema Camera
|
Canon 1Dc
|
Canon C100
|
|
RED Epic
|
Canon C300
|
Canon C500
|
IMPRESSIVE CONTROL EXPERIENCE
SMOOTHTRACK CONTROL
SmoothTrackTM gives the single gimbal operator the ability to translate their tilt and pan movements of the gimbal into smooth
and stabilized movements of the camera’s angle. Framing of broad wide-angle scenes or even close quarters becomes much
easier during single gimbal operator use.
AUTO CONFIGURATION
After balancing the camera with a simple tap of the ATS (Auto Tune Stability) button, Ronin will be automatically tuned for your
camera rig. The gimbal will intelligently adjust parameters based off the camera rigs weight and independently adjust each
individual axis until an optimal setting is found.
UPRIGHT OPERATION MODE
Upright Mode allows the gimbal to be flipped over and operate the camera closer to eye level without straining to lift the gimbal.
This can be used in various situations such mounting on the top of the vehicle. There are no limitations.
SUSPENDED OPERATION MODE
Standard gimbal operation is in Suspended Operation Mode. Low slung, close to the ground or simply holding the gimbal in
front of you offers completely smooth and stabilized footage. This mode would also be used when mounted to a flying platform
such as a multirotor.
2ND OPERATOR CONTROLLER
A 2nd operator transmitter is also included with the package. This allows for pan and tilt control as well user assignable
speeds and operation modes with 2 custom toggle switches on the transmitter.
OPTIONAL JOYSTICK PAN/TILT
Single thumb control is available for the Ronin Handheld Gimbal System. Pan and Tilt movements can be controlled via the
optional joystick attachment. SmoothTrack mode can be turned on or off via the optional joystick interface.
POWERFUL HARDWARE SUPPORT
l Support for DJI Lightbridge Full HD Video Downlink
l Quick Release Smart Battery System with 4-Hour+ Run Time
l Quick Release Top Handle Bar for Easy Break-Down & Mounting to Various Platforms
l Dual 15mm Rods for Follow-Focus or Matte Boxes
l Precision High Power, High Torque Brushless Motors
l Top Bar Accessory Mounts
