FPV Cable&hub Phantom 2

PHANTOM 2 FPV kit contains cables and a FPV HUB, making the
connections convenient and easy when connecting the iOSD mini，iOSD
Mark II and DJI specified wireless video transmission module AVL58.
In the Kit
1. FPV HUB, the main connection board used to extend devices.
2. FPV-AVL58 cable, used to connect the AVL58 module and FPV HUB.
3. FPV-iOSD Mark II cable, used to connect the iOSD Mark II and FPV
HUB.
4. FPV-H3-2D cable, used to connect the H3-2D gimbal and FPV HUB.
5. FPV-iOSD mini cable, used to connect the iOSD mini and FPV HUB.
6. FPV-4-Pin cable, used to connect the FPV HUB and other wireless
video transmission module.
Connections
The FPV HUB and iOSD or iOSD Mark II is optional to install inside the PHANTOM 2 or outside of it. If inside, users should open the top cover of the aircraft and fix the devices firmly in proper position on the central board of the PHANTOM 2.
Notes
(1) If install the devices in the PHANTOM 2 , please use 3M pads to
fix the devices firmly and take care to prevent short circuit.
(2) It’s not recommended to install the AVL58 transmitter within the
PHANTOM 2. Users can make the FPV-AVL58 cable thread
through the hole of landing gear and connect to the AVL58
installed outside of the aircraft. Make sure to install the AVL58
away from the compass to avoid interference.
(3) If using the FPV HUB, the original 4-Pin cable and video cable on
PHANTOM 2 will be spare, and users can remove the cables