Catapulta para Aviones y UAV (new) ejection frame hook ( new version ) V2

Nueva version, mas resistente, nuevo sistema de lanzamiento, con nuevo modelo de muelles

Muy ligera, portatil

para aviones de 1.5- 5 kilos de peso

distancia de lanzamiento 500 metros

20 Grados de inclinacion.

Introduction

Catapult is designed for small size UAV which weight is between 1.5Kg – 5Kg.

It has the advantage of large stretch , high stability and strength . TS-2 Catapult supports most of the flying wing layout plane , and it also can used by regular plane after changing the ejection hook .

Attention

• This instruction also can use for TS-2 Small Size Catapult.
• The bearing range of the Catapult is 1.5Kg – 5Kg.
• When the plane is not installed, please do not eject the catapult . It will decrease the service life.
• Place the Catapult at an empty ground and there is no barrier in front of it.
• Check the Catapult carefully after every use.
• Irrelevant personnel can not stand near the Catapult while using.

Disclaimer

●  Prohibit any user for any illegal purpose . Users will be responsible for all behaviors of purchase and use products.

●  Our company assumes no liability for any risks related to or resulting from the debug and use of this product

 (Including the direct , indirect or third-party losses ).

●  For any unknown sources of using , we will not be at any services.

●  Stokckrc reserves the right to amend this manual and the terms and conditions of use the product at any time.

●  This Agreement comes into effect automatically when the user purchases the product.

UAV RVJET FPV Flying Wing - KIT completo con Extencion de Ala y Soporte Camara

The RVJET platform features 2 wingspans, a huge 1.95 meter (76.7 inches) wing span for ultra stabile video footage, and a shorter 1.55 meter (61 inches) wing span for a fast and dynamic FPV experience. You get all the parts to build the RVJET  in wither long wing, or short wing.

RVJET features a unique and versatile camera gimbal, designed to suit both the popular GoPro Hero series as well as most micro cameras available on the market. The mechanics are designed to be 100% play-free, eliminating shaky video footage. The gimbal allows pan & tilt angles up to 170 degrees. Dome reflections are almost completely eliminated by implementing a smart design. The camera lens is positioned extremely close to the dome, maintains an equal distance form the dome at all angles and is protected by a glare shield . The front dome is easily removed without any tools or parts, simply twist and lock it into place.

The dome protects the camera inside and is of extreme high quality. The material used is optically clear as glass to ensure there is no image distortion and it is hard coated to improve the scratch resistance.
Available in both black and white, the RVJET airframe is made from very durable molded EPO foam. The kit includes high quality injection molded hardware. On the underside of the wing the landing skid protects the airframe and clear dome during rough landings and integrates a rugged hook that enables bungee launches.

The RVJET is shipped inside a custom made foam box that can be used for transporting the finished RVJET to and from the flying field safely for assembly.

What is included in the box:

- EPO airframe elements, CF spars
- pushrods, control horns
- glass fiber motor mount.  
- landing skid with bungee launch hook integrated (yellow color skid with black EPO kit, red color skid with white EPO kit)
- servo wire extensions for servos and body FPV channel (3 total pcs)
- antivibration mount for autopilot
- printed manual 

 This is a KIT, it does not include any servos and it does not include the RVPNT - Pan and tilt front nose gimbal.

Highlights

	Micro Camera Module Allows mounting of any micro camera with a 12 mm diameter diameter threads (most common).
	GoPro Camera Module Allows mounting of GoPro1, GoPro 2, Hero 3 , Hero3+
	Integrated Pan and Tilt Full 170 degrees of play-free motion with swappable pan/tilt axis allows for precise control and stunning footage
	Protective Dome Distortion-free and scratch-resistant to protect your camera investment from the unexpected without interfering with footage quality.
	Easy Assembly Intuitive design choices complemented by a world-class instruction manual really narrow the margin of error ensuring success for even the most novice of enthusiasts.
	Strong Design Constructed from durable EPO foam which is reinforced by carbon fiber rods and features a replaceable skid for rough landings.
	Flexible Design Removable bottom wing covers, universal motor mount and a generous payload compartment provide the flexibility necessary to create groundbreaking applications.
	Adjustable Wingspan Included wing extensions allow for two wingspan configurations; shorter wingspan(1.55m) increases aerial maneuverability while the longer wingspan(1.95m) supports a greater payload and increases flight stability.
	Safer Launches Large hand grip was designed for safe hand throws but also includes a hook for bungee launching.
	High-Performance Servos Included servos were hand selected with quality in mind. Wing servos are digital, high torque, metal gear, ball bearing type. Pan &tilt servos are also metal gear and offer a wide range of motion.
	Storage Container Shipping container doubles as a protective storage container to keep your RVJET safe during transportation
	Multiple Color Options Choose between a white or black RVJET body and stay tuned post-launch for additional color options

Please check the downloads tab for the RVJET PDF manuals.

Download the manual here.

List of products in this pack:

1 x RVPNT Main Housing (ref: rvpnt-mainhousing) 
1 x RVPNT front dome (ref: rvpnt-dome) 
1 x RVPNT outer pan ring (ref: rvpnt-outerring) 
1 x RVPNT tilt plate (ref: rvpnt-tiltplate) 
1 x RVPNT micro camera holder (ref: rvpnt-microholder) 
1 x RVPNT GoPro 1 & 2 holder (ref: rvpnt-goproholder-1) 
1 x RVPNT GoPro 3&4 Holder (ref: rvpnt-goproholder-3) 
1 x RVPNT servo holders (ref: rvpnt-servoholder) 
1 x RVPNT pan axis holders (2) (ref: rvpnt-panclipholder) 
1 x RVPNT stainless steel pushrods (complete set) (ref: rvpnt-pushrods) 
1 x RVPNT screws (20) (ref: rvpnt-screws20) 
2 x SIR12MG RVPNT servo for pan or tilt (ref: rvpnt-sir12mg) 
1 x RVPNT servo arm and linkage (set) (ref: rvpnt-linkage) 

 

 

 

Camera Pan + Tilt Control

Enjoy 120 degrees of motion!

 

 

 

• RVJET 14' Features and Updates
• RVJET 14' Manual

UAV RVJET FPV Flying Wing - KIT basico con extencion de ala

The RVJET platform features 2 wingspans, a huge 1.95 meter (76.7 inches) wing span for ultra stabile video footage, and a shorter 1.55 meter (61 inches) wing span for a fast and dynamic FPV experience. You get all the parts to build the RVJET  in wither long wing, or short wing.

RVJET features a unique and versatile camera gimbal, designed to suit both the popular GoPro Hero series as well as most micro cameras available on the market. The mechanics are designed to be 100% play-free, eliminating shaky video footage. The gimbal allows pan & tilt angles up to 170 degrees. Dome reflections are almost completely eliminated by implementing a smart design. The camera lens is positioned extremely close to the dome, maintains an equal distance form the dome at all angles and is protected by a glare shield . The front dome is easily removed without any tools or parts, simply twist and lock it into place.

The dome protects the camera inside and is of extreme high quality. The material used is optically clear as glass to ensure there is no image distortion and it is hard coated to improve the scratch resistance.
Available in both black and white, the RVJET airframe is made from very durable molded EPO foam. The kit includes high quality injection molded hardware. On the underside of the wing the landing skid protects the airframe and clear dome during rough landings and integrates a rugged hook that enables bungee launches.

The RVJET is shipped inside a custom made foam box that can be used for transporting the finished RVJET to and from the flying field safely for assembly.

What is included in the box:

- EPO airframe elements, CF spars
- pushrods, control horns
- glass fiber motor mount.  
- landing skid with bungee launch hook integrated (yellow color skid with black EPO kit, red color skid with white EPO kit)
- servo wire extensions for servos and body FPV channel (3 total pcs)
- antivibration mount for autopilot
- printed manual 

 This is a KIT, it does not include any servos and it does not include the RVPNT - Pan and tilt front nose gimbal.

New Skywalker X6 Flying Wing

Parameters:

Wing span: 1500mm

Wing area: 60dm2

weight: 770g without devices installed

fuselage length:680mm ,width:140mm

If you are looking for a perfect FPV platform with long flying time, long flying range, at the same time, small size, easy to take and e launch with the preparing time in just one minute, then the latest Skywalker x6 is your best choice.

The Skywalker designers have made the x6 as light as possible without losing strength at the meantime, only 1.5m wingspan but with 60dm2 wing area, which will make the x6 can take large payload or battery easily.

• Wing span: 1500mm
• Wing area: 60dm2
• Weight: 770g without devices installed
• Fuselage length: 680mm, width:140mm
• Takeoff weight: under 2kg
• Center of Gravity: 390-400mm away from the nose.

Recommended Parts:

• motor:2814 kv980/3815 kv1000
• esc:60a 
• servos:GWS 17g
• propeller:10 inch/ 9x5f
• battery:2x3s 2200mah/4s 4000mah

UAV MAJA, wing span 1800mm

UAV MAJA

Wingspan: 180 cm / 220 cm
Length: 120 cm

Weight without LiPo: 1,5 kg

Wing loading: from 52 g / dm ²

Space inside middle:  40 x 8 x 8 cm
Space inside front: 40 x 5 x 8 cm

Payload: 1,5 kg

Time of flight: ~ 1h

MAJA was developed as economical platform. The advantages of this system are in its simple and thought construction out. The used materials, which are used also in the automobile industry, exhibit a small weight and are extremely durable.

Fully assembled. Depending on the version, except for the electronics is to build in!

MAJA is appropriate an unmanned small aircraft (UAV) for the following tasks:

- Aerial photography
- Surveying
- Air observation
- Environmental protection

180cm without Power and RC)

E-flite Convergence™ VTOL BNF Basic & PNP

Key Features

• Multirotor versatility and sport plane agility
• Designed by champion pilot, Mike McConville
• Exclusive flight control software makes it incredibly easy to fly
• Stability and Acro Modes provide a wide performance envelope
• Powerful brushless motors for outstanding speed and climb performance
• Super-simple transmitter setup - no complex programming required
• FPV-ready with camera and video transmitter mounting stations
• Durable Z-foam™ material

Needed To Complete

Overview

VTOL (Vertical Takeoff and Landing) RC models are usually a mixed bag when it comes to performance. If they are stable, their speed and agility is often lackluster. If they are nimble, pilots have to work harder to transition between hovering and airplane flight. The Convergence™ VTOL park flyer changes all that. Its unique design and exclusive flight control software give you the best of both agility and stability while making the transition between multirotor and airplane flight so smooth and predictable, you will feel right at home your first time on the sticks.

Sleek and Simple

Unlike complex VTOL aircraft that rotate the entire wing and require as many as four motors to achieve vertical and forward flight, the Convergence™ park flyer uses a simple, yet sleek, delta-wing design with three brushless motors - two rotating motors on the wing and a fixed-position motor in the tail.

In multirotor flight the wing-mounted motors rotate up into the vertical position to provide lift and flight control along with the motor in the tail. In airplane flight, the wing-mounted motors rotate down into the horizontal position and the model's elevons take over pitch and bank control. Yaw control in airplane flight is provided by differential thrust from the wing-mounted motors.

Exclusive Flight Control Software Makes it Easy

At the heart of it all is flight control software that has been expertly tuned by designer, Mike McConville, so almost any RC pilot can experience the fun of VTOL flight.

Automated Transition

Making the transition between multirotor and airplane flight is as simple as flipping a switch. The flight controller will smoothly rotate the two wing-mounted motors into the correct flight attitude and activate the rear motor as needed.

Stability and Acro Flight Modes

These two flight modes give you a wide range of performance for every phase of flight.

• • Stability Mode
    • In multirotor flight, Stability Mode will limit pitch and bank angles and work to keep the model level when you release the sticks. This allows you to take off and land like a pro, even if you've never flown a multirotor before. In airplane flight, it will limit pitch and bank angles and automatically return the wings to level when the sticks are released.
    • Stability Mode automatically engages during the transition between multirotor and airplane flight. It seamlessly maintains self-leveling and angle limits from one phase of flight to the other, making this the easiest RC VTOL experience you will find anywhere.
  • Acro Mode
    • In Acro Mode there are no angle limits or self-leveling in any phase of flight. During multirotor flight, the model will behave like a conventional multirotor that pitches and banks in whatever direction you want it to fly. It can flip and roll like other multirotors, too.
    • In airplane flight, Acro Mode lets you perform a wide range of aerobatic maneuvers. And because you have the forward thrust of two brushless motors working for you, there is plenty of speed and power to spare. You can even use the differential thrust of the motors to perform unique spinning and tumbling maneuvers.

FPV Ready

The model is designed to accommodate several of the most popular FPV camera systems. There is a camera bay under the nose and a place to mount the video transmitter in the rear of the aircraft. Both locations are easy to access so installation takes just a few minutes.

Recommended FPV System - All Items Sold Separately

• Spektrum 650TVL CCD FPV Camera NTSC
• Spektrum 25mW 5.8GHz Video Transmitter
• Power Adapter
• Spektrum 4.3-Inch Video Monitor with Headset

Super-Simple Receiver Installation and Transmitter Setup

This Plug-N-Play® version can be flown with any 6+ channel aircraft transmitter. It gives you the option of using either a conventional receiver with standard servo connections or a serial receiver. Just connect whatever receiver you choose to the model's flight controller. No complex transmitter programming is required. You use the channel-5 switch for selecting Stability or Acro mode and the channel-6 switch to transition between multirotor and airplane flight.

Minidrone NINOX, folding electric airplane, EPP black, wingspan 100 cm inc

NINOX

The NINOX from BORMATEC  is an action-camera electro-flyer, which can fold into a backpack. It was specially developed for action-cameras like the GoPro Hero and similar.

The NINOX has a wingspan of 100 cm with a weight of approximately 500 gr. The winglets can be turned down, so the NINOX has without problems in a backpack space and nothing can be damaged. The folding technique requires no tools and takes only a few handles.
The voluminous fuselage accommodate action-camera, RC, autopilot & Telemetry !
The flight characteristics of Ninox are classified as absolutely simple. He can be flown slowly but quite speedy.
For the NINOX, we use only high-quality materials such EPP and Coroplast, what makes these pocket-flyer extremely resistant.

MADE-IN-GERMANY

Materials:
colored EPP + Coroplast
Wingspan: 100 cm
Take-off weight: 600 gr
Time of flight with 3S/2200: ~ 20 min

Recommended power: Brushless motor ~ 35g/120W; Prop 8x4; LiPo 3S/2000

Set-Versions:

Basic: NINOX fully assembled        

Avion completo Cessna TTX, 2.4GHz, BL, S/A/L

incluye:

emisora, bateria, lipo

listo para volar

envergadura : 1.450 mm; largo: 990 mm; peso.: 960 g; Motor: Ø30x28mm 1.350kV; Akku: LiPo 3s 11,1V; RC-Anlage: ab 5 Kanäle

Multiplex EasyGlider 4

El EasyGlider es un modelo robusto y de buen carácter, con 4 con alerones y ya va por la 4ª generación!
Su fuerza permite disfrutar con una velocidad de marcha baja en vuelos sin motor y corrientes térmicas ascendentes.
De acuerdo con el lema: la evolución no revolución ELAPOR® este clásico ha sido revisada y es 100% Made in Germany . El Easy Glider de Multiplex es un modelo de culto y sin igual en su campo, por lo tanto, el Easy Glider 4 tenía que seguir siendo un verdadero EasyGlider.
¡Como novedad!
• ala ultra-ligera y de alta resistencia en fibra de vidrio.
• fuselaje rígido de M-Space tecnología
• empanaje extraíble - fácil de transportar
• hoja de adhesivos de diseño moderno.
• Más eficiente y más fácil de manejar con el kit de propulsión ROXXY

Requerido para el funcionamiento : emisora, motor, hélice, regulador, 2 xservos Nano, 2x servos Tiny , batería , pegamento, 2 alargadores de 20 cm y dos de 40 cm

WP FLASH 750 RC Elektro Flugmodell

Listo para volar con servos y motor y variador de 60A montado, a falta de bateria y receptor

Motor sin escobillas de alto rendimiento
Material de espuma de alta resistencia

Excelentes características de vuelo y de alta velocidad de vuelo


Envergadura aprox. 750 mm
Longitud total, aprox. 750 mm
Todos los de peso aprox. 620 g
Área del ala 15,5 dm ²
Carga alar 40,0 g / dm ²