Zeiss Cinemizer OLED, visualizador personal Full HD 3D

Las gafas Zeiss Cinemizer OLED son un sistema de visualización personal que basa en dos pequeñas pantallas OLED que nos ofrecen una resolución Full HD 1080p y que son compatible con 3D con un tamaño reducido y son mucho más pequeñas y ligeras que otros productos similares de la competencia.

Zeiss ha creado el Cinemizer OLED como un monitor personal, por lo que podremos coenctarlo a numerosas fuentes de video externa mediante sus conexiones: MiniHDMI compatible con el estándar 1.4a, MiniUSB, cable de vídeo compuesto y un adaptador para el conector de los dispositivos Apple. Cualquier fuente de vídeo que conectemos se reproducirá como la tengamos en esa fuente, exactamente igual que un monitor

Las Cinemizer OLED se suministran con sus propios auriculares, aunque podremos conectar otros mediante la entrada Jack de 3.5 milímetros. La autonomía de estas gafas es de seis horas con fuentes como el iPod, que se verán recortadas drásticamente hasta sólo 2 horas cuando la señal llega a través del conector HDMI

El efecto de las Cinemizer OLED es el de una pantalla de cuarenta pulgadas a dos metros. Además, podemos graduar la imagen desde -5 a 2 dioptrías para corregir la visualización parea aquellos que usen gafas graduadas habitualmente,  Otro detalle destacado es que las Cinemizer OLED es  llevan integrados sensores de movimiento y posición que permiten, si el contenido es compatible, ver en 3D real todo a nuestro alrededor, lo que represente un primer paso necesario para la realidad virtual.

ESPECIFICACIONES

VIDEOS DEMOSTRATIVOS:

-Para ser visualizados con las Gafas Cinemizer OLED. Seleccionar modo visualización en paralelo, haciendo click sobre el logo 3D de la barra del reproductor de YouTube y mantener apretado el botón multifunción del Cinemizer durante al menos 3 segundos, hasta que se encienda el botón azul y cambie al modo 3D

http://www.youtube.com/watch?v=CDQ3rmEeKN8

http://youtu.be/Qs0R1IPx4NE

http://relaxvideo.hu/3d-mystic_en.html

http://www.youtube.com/watch?v=lhpeD4WpitU&feature=related

FatShark gafas Attitude SD V.2 (HT Trinity, Rx 5.8Ghz)  con 600mw ,  MIG V4 headtracker

Con Head Tracker, Receptor 5.8Ghz integrado, Bateria, Transmisor Video en 5.8Ghz!!!

La manera más fácil para empezar con FPV! ya sea con un multicoptero o un avión


LAs gafas Fatshark ATTITUDE SD glasses with 35 degree FOV. Estan equipada con un Head tracker MIG (Gyro magnética, inercial), para mover la camara (con pan&Tilt) instalada en el modelo cuando movamos la cabeza. Proporciona una experiencia realmente envolvente.

Este set que ofrecemos también incluye  Transmisor de 5,8 Ghz para instalar en el avión o multicopter.
 

INCLUYE:

- Gafas Attitud sd con Head Tracking y Receptor integrado de 5,8 Ghz
- Transmisor 5,8 Ghz 600mW
- Funda de carcasa dura con cremallera, para transporte
- Cable para Head Tracker para conectar a (Jr, Turnigy 9X)
- Cable AV (para conectar a dispositivos AV externos de visualización / grabación)
- Antena 5,8 Ghz y 3 dBi
- Bateria 7.4V 1000mAh RC con adaptador para carga (se carga mediante cargador estándar RC)
- Adaptador para carga de bateria con conector XT60
- Manual

- FOV Campo de visión de 35 grados en diagonal, resolución VGA pantalla LCD en color
- Distancia interpupilar: ajustable 59 - 69mm
- NTSC / PAL selección automática (entrelazado)
- Receptor -90dBm New Model 5,8 g de 7 canales, (compatible con transmisores Airwave, ImmersionRC)
- Batería: 1000 mAh, 7.4V
- Consumo 7.4V: 150mA/300mA (cable / inalambrica)
- Frecuencia: 5740 MHz, 5760 MHz, 5780 MHz, 5800 Mhz, 5820 MHz 5840 Mhz 5860 MHz

Transmisor 5,8 Ghz:

- Frecuencia: 5.8Ghz
- Potencia de transmisión: 600mW
- Tensión de entrada: 6 ~ 12V

Flysight SPX02 FPV Goggles Built-in 5.8G Diversity Receiver with PIP

Set completo... gafas, bateria, cargador, fuente..

Se ve el menu completo de la aplicacion DJI go para inspire o phantom 3 y 4 si llevan instalado el modulo hdmi

compatible con inspire, a falta de cable mini hdmi a mini hdmi

Compatibles con todos los transmisores de video

camara frontal

Pip, puedes ver dos canales al mismo tiempo

entrada hdmi

Flysight SPX02 FPV Goggles Built-in 5.8G Diversity Receiver with PIP

complet set, battery, charger, all....

 HDMI Compatible with DJI phantom 3&4, DJI inspire 1
40channels available
Easy shuttle, easier to change contrast, color etc.
False color, focus assist and central mark
Upgraded face plate with more comfort
Unique Picture in Picture Function
Front Camera
854x480(WVGA)
2S-6S Input (7-28v)
Built-in diversity receivers;
PPM remotely controls PIP and Front camera
Flysight SpeXman is a kind of All-in-One 5.8GHz FPV goggles with Diversity receivers, which can get the maximum reception possible; full next-wave and air-wave support provides wide use on your Fatshark and Immersion RC products. The Goggles SpeXman one features a front wide angle facing camera ,which brings you one more eyes ,so you can see your surroundings while you fly. It is a hit on race application, which makes racers feel SAFE.One-button operation makes your fly easy, and HDMI input can work with Phantom 3 and Inspire 1.

AMAZING PICTURE IN PICTURE COMES OUT,MULTIPLE MODES SUPPORTED
 

PIP FLYSIGHT 5.8 GHz PICTURE IN PICTURE

HDMI Support HDMI 1.3 Digita In Support HDMI Audio in

CAMERA A front facing camera for watching surroundings

EARPHONE Put yourself in the center of a scenic aerial pull-out.

From Flysight,manufacturer of the black pearl monitor here comes the PIP goggles using same components,as racing drones(250 or 180 class)are getting hot day by day and so are DJI phantoms,all of you definitely need a goggles,and this superior goggles is a perfect match for FPV racing and HDMI version of DJI phantoms!

	A COMPLETE READY- TO-FLY SYSTEM Everything you need is included in the goggles,offering you a complete aerial film and live video : Built-in 5.8GHz diversity receiving modules with picture in picture function by foresight camera, which makes you watch surroundings easily and feel safe when flying.This All-in-One design brings you ready to go when you get it. Just wear them to fly!

UNIQUE PICTURE IN PICTURE FUNCTION

To enable PIP select Menu > General Settings > PIP and switch to <ON>.
The secondary image can be be made smaller or larger by selecting Size. Cycle through the three sizes of 420x240, 266x160 and 133x80 pixels using the <-> and <+> buttons.
The second image can be moved by selecting Position. Toggle between the eight positions by using the <-> and <+> buttons.
Long hold the <OK> button to activate and deactivate the PIP on screen.
 
 

PPM IN
Select the channel for binding your RC transmitter to the goggles, you can then assign switch positions for activating/ deactivating PIP or the front facing camera.

DC IN
Wide DC in range 6-28V brings you more using chance on 2S to 6S Li-Po Battery.

HDMI IN
For a clearer image switch to HDMI input,the goggles will display a maximum input of 1920*1080/60Hz.
Wireless receivers are automatically turned off in this mode to save power.
Please note that you may experience a delay of up to 11 seconds before the function starts after selecting the HDMI mode.

EAR OUT
Enjoy your stereo audio by connecting through the earphone port.








FRONT FACING CAMERA FUNCTION
While in any of the Modes tap the <OK> button to enable the front facing camera function, this will switch the goggles to a full screen display of the feed from the forward facing camera. Tap <OK> again to return to the previous Mode.
Please note that you will lose PIP when switching to the front facing camera function. 

DIV MODE
In this mode the goggles constantly compare the RSSI of ANT1 and ANT2, and then switch to the strongest signal.
DIV AV OUT port outputs Diversity signal for your video recorder or external display.
DIV AV OUT only works in DIV mode.

MAIN MENU
Press the <Menu> button to view either the General Settings or System Settings.
Use the <Mode> button to move between the different icons, <OK> to select the highlighted icon, and <Menu> to return to previous screens.



SPECS



Specifications

SPEXMAN ONE SPX01 WIDELY USED Flysight SpeXman one SPX01 picture in picture diversity Goggles with charger,battery and power supply
 

IT CAN BE USED IN F250 COMBO Flysight SpeXman one Goggles SPX01,it is All-in-One video glasses with diversity function,which can keep the best receiption always,you can get the stable video when you fly our Speedy racer copter F250;SPX01 is also with Picture in Picture function,which brings one more eyes when you are flying the Speedy F250, you will feel more safe and easier to watch surrounds.This is a hit feature for all races.Flysight makes smart backpack for the F250 combo,which is RTF combo for you to take and fly.It is worthy having it.

     

REIMAGINE MOVEMENT Flysight Speedy F250 V1.0 is a basic racer,which is specially born for the SpeXman one Goggles.It is stable and fast,which makes your flying feeling crazily when you wear SpeXman one Goggles. Flysight adopts 3K carbon fiber board and X rotors,and optional flight control on APM,CC3D and NAZE and so on to meet your need.

 

 

IT CAN BE USED TO FLYSIGHT RACE COPTER SPEEDY F250

Flysight SpeXman one Goggles,mainly used in race copters Speedy F250; they work together to bring amazing First Personal View feeling.Don’t hesitate to get them and fly together in the nature.
 

 

IT CAN BE USED IN FLYSIGHT SMART DRONE F350

Flysight SpeXman one Goggles,can be also used in Flysight smart drone F350; you can get OSD information on the goggles when you fly the drone F350, and also watch your surroundings without removing the goggles.So get it and feel it,you will love it!

 

IT CAN BE ALSO USED IN OTHERS

It also compatible with DJI phantoms and Inspire,even the newest phantom 3 due to its HDMI input function,since DJI just announced an adapter of Phantom 3 which allows HDMI.
 

  Flysight SpeXman one Goggles,can be applied in a wider range of areas,such as watching TV,playing games,taking filming and so on. It is widely use as large as your imagination!

FLYSIGHT FPV All-IN- ONE DIVERSITY GOGGLES SPEXMAN ONE SPX01

Battery Charger BC01   3S Li-Po Battery FSBP01   All-in-One & Single Eye Cup   Omni Antenna CPA5G   Panel Antenna PA511   Power Supply 12V/2A   Minus Lens

ANEW BATTERY CHARGER MAKES EVERYTHING EASY AND SAFE

Specially customized battery charger for 3S Li-Po Battery FSBP01,which is arm-fixed for powering SpeXman one goggles with magic stick and D-tap cable.

BC01
BC01 is specially designed for SpeXman goggles SPX01 and Flysight 3S Li-Po battery FSBP01, it works with power volume indication lights and easy installation with magic tap on arm,which is more safe than on the head. LEARN MORE >

FSBP01
FSBP01 is so slim 3S Li-Po battery,which can be used on Black Pearl RC801 and Spexman one Goggles SPX01;it got the TUV’s CE and MSDS certifications, so it can be safely used.

 

AN IMPROVED SIGNAL WAY BY CLOVERLEAF ANTENNAS

Right-hand circular polarization or (RHCP) have well and truly been established as the antenna of choice for 5.8GHz FPV use and now you can enjoy the benefits without the head scratching involved in making them yourself. The Hard case enclosure will ensure that your antennas are never damaged or bent out of shape while handling or after a ruff landing while the flexible cable ensures easy positioning for optimum performance.

PA511	CPA5G
PA511 5.8Ghz 11dBi high-gain Panel Antenna Band: 5600-5900MHZ Gain: 11 dbi Lobe level: 45 degrees,Vertical lobe: 30 degrees VSWR: <2.0 Input Impedance: 50 ohms Polarization: Vertical Maximum Power: 50W Size: 70x70x117mm Can be offered with SMA and RP-SMA	CPA5G 5.8G FPV Omnidirectional Circular Polarized Antenna Frequency Range: 5700-5900 MHz Gain: 3.5 dbi Impedance: 50 Ohm VSWR: Less than 1.5 Polarization: RHCP; Radiation: Omni Maximum Power Input-watts: 20 W Connector: SMA and RPSMA optional Coaxial Cable: RG316        Clover (TX): 14g;Skew (RX): 16g Case size: 36m(w) 18mm(h) Cable Length: 73mm(skew) 36mm(clover)

FatShark Attitude V.4 10 Aniversario, con Rx OLED

NUEVA Careta con Ventilador y Protector Superior!!!

Receptor Oled, Head Tracker integrado 

Fatshark ha actualizado su gama de Attitude con esta edición especial por su 10º aniversario. Este es una edición limitada, viene con mejoras y un color rojopara darle un aspecto espectacular y especial.

El Attitude V4 viene con todas las características excelentes como campo de visión de 32 grados (FOV), pantalla 4: 3 VGA para la experiencia de visualización más inmersiva. Hay un grabador interno (DVR) para grabar todos sus vuelos con facilidad. Además, hay un nuevo receptor de video OLED en 5,8 GHz con 32 canales para proporcionar una mejor estabilidad de imagen con sensibilidad de señal mejorada. El receptor tiene una función de cambio de banda de un solo toque, escaneado de canales y un analizador de espectro para una selección de canales limpia y sencilla. Incorpora ventilador para mantener su visión más clara y sin empañamiento.  

Caracteristicas:

• Nuevo modulo Receptor OLED de 32 canales  con sensibilidad y estabilidad de señal mejoradas
• 32° de campo de vision (FOV)
• Pantallas VGA 4:3 
• Grabador de video Digital (DVR)
• Ventilador integrado para mejor visión, evitando que se empañe la pantalla.
• Distancia interpupilar ajustable (IPD): 58-72mm permite el ajuste de las gafas para ajustar a casi cualquier cara.

Especificaciones

• FOV 32°Diagonal
• Distancia interpupilar 58-72mm IPD  (ajustable)
• Pantalla VGA 640 X 480
• NTSC/PAL Selección automatica
• 9DOF 3-ejes Head Tracker (nuevo modelo)
• Puerto para intercambios de modulos receptor
• Corriente: 7-13V (2S/3S)
• Consumo: 2.7W
• Frecuencias: 32 canales
  Band 0-0 (FS/IRC)         5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
  Band 0-1 (Boscam E)    5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
  Band 1-0 (Boscam A)    5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
  Band 1-1 (Raceband)    5658, 5695 5732, 5769, 5806, 5843, 5880, 5917

INCLUYE:

1x Gafas FatShark Attitude V4 (Edición especial 10 Aniversario)
1x Nuevo modulo Receptor OLED de 32 canales  con sensibilidad y estabilidad de señal mejoradas.
1x Antena SpiroNET omni
1x Bateria de 1000 mAh con indicador LED
1x Cable de carga para Batería.
1x Funda dura de transporte.

Gafas FPV Skyzone 3D FPV Goggles

The new Skyzone 3D FPV Goggles are flat out the most advanced and feature rich FPV goggles on the market.

Skyzone has designed their new 3D goggles from the ground up, so no compromises were made. The High resolution widescreen matched with a 30 degree field of view puts you in the cockpit, the new included 3D camera and match special 600mW VTX works with the dual receivers built in to the goggles to give you a true seamless 3D FPV experience.  Blend that with the state of the art auto centering head-tracker and you have a true immersion like you have never seen.

Skyzone has matched their beautiful FPV view with reliability and adjustability, from the built in 32 channel dual diversity 5.8GHz receiver to the IPD and Diopter adjustments. The goggles have full A/V ins and outs and now a built in DVR with playback. Heck, you can even watch a movie with them! The goggles have a front mounted camera, with a quick push of a button your view switches allowing you to perform all kinds of tasks without the need to lift the goggles. The goggles also feature light tight comfortable eyecups and an earphone jack with volume control.

The quality and features of the new Skyzone FPV Goggles have definitely raised the bar, so if you’re ready for some seat of your pants true 3D flying from the cockpit view, look at these Skyzone goggles.

Features:
• 3D !!!
• Complete plug and play kit
• 2D diversity mode
• DVR built in with playback
• Built-in 32CH 5.8G Diversity that is compatible with most FPV 5.8G transmitters on the market (Fatshark,DJI,Walkra,Boscam etc)
• Built-in self-calibrating head tracking (gyro, inertial and compass)
• Built in Dual 854X480(WVGA) Monitors,  1,229,760 color sub-pixels
• Built-in external camera for surrounding view (640X480)
• AV in/ AV out/ Earphone socket (with volume control)
• Adjustable Interpupillary and Diopter for your eyes
• Adjustable brightness and contrast

More specs and information to follow as we get closer to release.

Specs:
FOV: 30 degrees
Resolution: 854x480 (WVGA) 1230k
Interpupillary (IPD) distance: 60-68mm adjustable, Diopter with optional lenses
Channels: 32CH 4band 5.8GHz (Fatshark, Boscam & Skyzone compatible)
Receiver: Dual ISM 32ch Diversity receiver -90dbm Sensitivity
Video format: NTSC/PAL
Antenna connector: 2x SMA 50ohm
Video in/out: 1.0VP/75ohm
Audio in/out: 1.0VP/10kohm
Front internal camera: 120 degree 640x480
head tracker: Compass/ Inertial and gyro ppm selectable channel output
A/V port: 3.5mm
Ear Out: 3.5mm with volume control
power Supply: dc7-28v / 1A
Power consumption: 4.3w

3D Camera Specs:
FOV: 85 degrees (Diagonal)
F/NO: 3.0
Resolution: 720X576
Video Standard: PAL
Video output level: 1.0Vp-p Typ. / 75ohm
Audio output level: 2.0Vp-p Typ. / 10Kohm
Power supply: DC 5.0V/ 0.5A
Power Consumption: 1.6W

Dominator V3 modular WVGA headset.   Suitable for HD links with 16:9 format

Incluye Bateria 1800mAh, Careta con Ventilador!!!

Flysight SPX01 SpeXman One FPV Video Goggles with 5.8GHz Video Receiver

compatible con inspire, a falta de cable mini hdmi a mini hdmi

Compatibles con todos los transmisores de video

camara frontal

Pip, puedes ver dos canales al mismo tiempo

entrada hdmi

FLYSIGHT FPV All-IN- ONE DIVERSITY GOGGLES SPEXMAN ONE SPX01

AMAZING PICTURE IN PICTURE COMES OUT,MULTIPLE MODES SUPPORTED
 

PIP FLYSIGHT 5.8 GHz PICTURE IN PICTURE

HDMI Support HDMI 1.3 Digita In Support HDMI Audio in

CAMERA A front facing camera for watching surroundings

EARPHONE Put yourself in the center of a scenic aerial pull-out.

From Flysight,manufacturer of the black pearl monitor here comes the PIP goggles using same components,as racing drones(250 or 180 class)are getting hot day by day and so are DJI phantoms,all of you definitely need a goggles,and this superior goggles is a perfect match for FPV racing and HDMI version of DJI phantoms!

	A COMPLETE READY- TO-FLY SYSTEM Everything you need is included in the goggles,offering you a complete aerial film and live video : Built-in 5.8GHz diversity receiving modules with picture in picture function by foresight camera, which makes you watch surroundings easily and feel safe when flying.This All-in-One design brings you ready to go when you get it. Just wear them to fly!

UNIQUE PICTURE IN PICTURE FUNCTION

To enable PIP select Menu > General Settings > PIP and switch to <ON>.
The secondary image can be be made smaller or larger by selecting Size. Cycle through the three sizes of 420x240, 266x160 and 133x80 pixels using the <-> and <+> buttons.
The second image can be moved by selecting Position. Toggle between the eight positions by using the <-> and <+> buttons.
Long hold the <OK> button to activate and deactivate the PIP on screen.
 
 

PPM IN
Select the channel for binding your RC transmitter to the goggles, you can then assign switch positions for activating/ deactivating PIP or the front facing camera.

DC IN
Wide DC in range 6-28V brings you more using chance on 2S to 6S Li-Po Battery.

HDMI IN
For a clearer image switch to HDMI input,the goggles will display a maximum input of 1920*1080/60Hz.
Wireless receivers are automatically turned off in this mode to save power.
Please note that you may experience a delay of up to 11 seconds before the function starts after selecting the HDMI mode.

EAR OUT
Enjoy your stereo audio by connecting through the earphone port.








FRONT FACING CAMERA FUNCTION
While in any of the Modes tap the <OK> button to enable the front facing camera function, this will switch the goggles to a full screen display of the feed from the forward facing camera. Tap <OK> again to return to the previous Mode.
Please note that you will lose PIP when switching to the front facing camera function. 

DIV MODE
In this mode the goggles constantly compare the RSSI of ANT1 and ANT2, and then switch to the strongest signal.
DIV AV OUT port outputs Diversity signal for your video recorder or external display.
DIV AV OUT only works in DIV mode.

MAIN MENU
Press the <Menu> button to view either the General Settings or System Settings.
Use the <Mode> button to move between the different icons, <OK> to select the highlighted icon, and <Menu> to return to previous screens.



SPECS



Specifications

SPEXMAN ONE SPX01 WIDELY USED Flysight SpeXman one SPX01 picture in picture diversity Goggles with charger,battery and power supply
 

IT CAN BE USED IN F250 COMBO Flysight SpeXman one Goggles SPX01,it is All-in-One video glasses with diversity function,which can keep the best receiption always,you can get the stable video when you fly our Speedy racer copter F250;SPX01 is also with Picture in Picture function,which brings one more eyes when you are flying the Speedy F250, you will feel more safe and easier to watch surrounds.This is a hit feature for all races.Flysight makes smart backpack for the F250 combo,which is RTF combo for you to take and fly.It is worthy having it.

     

REIMAGINE MOVEMENT Flysight Speedy F250 V1.0 is a basic racer,which is specially born for the SpeXman one Goggles.It is stable and fast,which makes your flying feeling crazily when you wear SpeXman one Goggles. Flysight adopts 3K carbon fiber board and X rotors,and optional flight control on APM,CC3D and NAZE and so on to meet your need.

 

 

IT CAN BE USED TO FLYSIGHT RACE COPTER SPEEDY F250

Flysight SpeXman one Goggles,mainly used in race copters Speedy F250; they work together to bring amazing First Personal View feeling.Don’t hesitate to get them and fly together in the nature.
 

 

IT CAN BE USED IN FLYSIGHT SMART DRONE F350

Flysight SpeXman one Goggles,can be also used in Flysight smart drone F350; you can get OSD information on the goggles when you fly the drone F350, and also watch your surroundings without removing the goggles.So get it and feel it,you will love it!

 

IT CAN BE ALSO USED IN OTHERS

It also compatible with DJI phantoms and Inspire,even the newest phantom 3 due to its HDMI input function,since DJI just announced an adapter of Phantom 3 which allows HDMI.
 

  Flysight SpeXman one Goggles,can be applied in a wider range of areas,such as watching TV,playing games,taking filming and so on. It is widely use as large as your imagination!

FLYSIGHT FPV All-IN- ONE DIVERSITY GOGGLES SPEXMAN ONE SPX01

Battery Charger BC01   3S Li-Po Battery FSBP01   All-in-One & Single Eye Cup   Omni Antenna CPA5G   Panel Antenna PA511   Power Supply 12V/2A   Minus Lens

ANEW BATTERY CHARGER MAKES EVERYTHING EASY AND SAFE

Specially customized battery charger for 3S Li-Po Battery FSBP01,which is arm-fixed for powering SpeXman one goggles with magic stick and D-tap cable.

BC01
BC01 is specially designed for SpeXman goggles SPX01 and Flysight 3S Li-Po battery FSBP01, it works with power volume indication lights and easy installation with magic tap on arm,which is more safe than on the head. LEARN MORE >

FSBP01
FSBP01 is so slim 3S Li-Po battery,which can be used on Black Pearl RC801 and Spexman one Goggles SPX01;it got the TUV’s CE and MSDS certifications, so it can be safely used.

 

AN IMPROVED SIGNAL WAY BY CLOVERLEAF ANTENNAS

Right-hand circular polarization or (RHCP) have well and truly been established as the antenna of choice for 5.8GHz FPV use and now you can enjoy the benefits without the head scratching involved in making them yourself. The Hard case enclosure will ensure that your antennas are never damaged or bent out of shape while handling or after a ruff landing while the flexible cable ensures easy positioning for optimum performance.

PA511	CPA5G
PA511 5.8Ghz 11dBi high-gain Panel Antenna Band: 5600-5900MHZ Gain: 11 dbi Lobe level: 45 degrees,Vertical lobe: 30 degrees VSWR: <2.0 Input Impedance: 50 ohms Polarization: Vertical Maximum Power: 50W Size: 70x70x117mm Can be offered with SMA and RP-SMA	CPA5G 5.8G FPV Omnidirectional Circular Polarized Antenna Frequency Range: 5700-5900 MHz Gain: 3.5 dbi Impedance: 50 Ohm VSWR: Less than 1.5 Polarization: RHCP; Radiation: Omni Maximum Power Input-watts: 20 W Connector: SMA and RPSMA optional Coaxial Cable: RG316        Clover (TX): 14g;Skew (RX): 16g Case size: 36m(w) 18mm(h) Cable Length: 73mm(skew) 36mm(clover)

SJ-V01 5.8G 40CH FPV Goggles 7 Inch 1280x800 HD Video Glasses with HDMI Input

Phntom 4, 3  and Inspire 1 comptabible, just you need a hdmi out put in the DJI rc

Diponible stock

FatShark Transformer 5.8 Ghz HD Bundle

The FSV1104 bundle includes the FSV1101 monitor and FSV1103 single panel viewer

This FSV1104 bundle is a complete goggle kit with the HD monitor preinstalled into the Full Panel Viewer.  In this configuration, the goggles enjoy the cost benefit of a single panel design but in a form and comfort factor closer to micro display type goggles.  The patented folded optics allow both eyes to converge onto the single display in a viewer that is less than half the size of all previous single panel style headsets. A bottom mounted access panel can be opened to change the optics for different magnifications (sold separately).

Contents:

- FSV1101 720p monitor with antenna diversity receiver (antenna not included)
- FSV1103 HD Full Panel Viewer
- 18650 cell Li-Ion battery holder (battery and charger not included)
- Power extension cable
- Manual
- Screen and lens cleaning cloth

Este producto Pantalla Transformer FSV1104  incluye: el monitor FSV1101 y el visualizador de panel único FSV1103

Este producto FSV1104 es un kit completo de gafas con el monitor HD preinstalado en el Visor de Panel Completo. En esta configuración, las gafas disfrutan del beneficio en costes de un diseño de panel único, pero en un factor de forma y comodidad más cercano a las gafas de tipo micro pantalla. La óptica plegada patentada permite que ambos ojos converjan en la única pantalla en un visor que es menos de la mitad del tamaño de todos los auriculares anteriores de un solo panel. Se puede abrir un panel de acceso montado en el fondo para cambiar la óptica para diferentes ampliaciones (se venden por separado).



Especificacines:

• Marca: Fat Shark
• Nombre del artículo: Transformer HD Bundle
• Frecuencia: 5.8GHz
• Receptor: Diversity 5.8Ghz

Contenido:

- Monitor FSV1101 720p con receptor de diversity (antena no incluida)
- FSV1103 HD Full Panel Viewer
- Soporte de batería Li-Ion de 18650  (batería y cargador no incluidos)
- Cable de extensión de alimentación
- Manual
- Paño de limpieza de pantalla y lentes

Set Predator V.2 RTF FPV, Rx 5.8Ghz, Camara, Tx 250 Mw

un producto completo para la iniciacion en el mundo FPV.

INCLUYE:

- Gafas Predator V.2 con Receptor NexWave integrado de 5,8 Ghz
- Transmisor 5,8 Ghz 250mW
- 5V Camara CMOS "CCD Killer" V2 600 lineas 
- Filtro alimentacion Tx
- Funda de carcasa dura con cremallera, para transporte
- Cable AV (para conectar a dispositivos AV externos de visualización / grabación)
- Antena 5,8 Ghz
- Bateria 7.4V 1000mAh RC con adaptador para carga (se carga mediante cargador estándar RC)
- Adaptador para carga de bateria con conector a cargador
- Manual

Especificaciones Gafas Predator V.2:

- FOV Campo de visión de 25 grados en diagonal, resolución VGA pantalla LCD en color
- Distancia interpupilar: fija 63.5mm
- NTSC / PAL selección automática (entrelazado)
- Receptor -90dBm 5,8 g de 7 canales, modulo NexWave (compatible con transmisores Airwave, ImmersionRC)
- Batería: 1000 mAh, 7.4V
- Consumo 7.4V: 140mA/290mA (cable / inalambrica)

Especificaciones de la cámara:

- Lente: 3.6mm IR, 87 º FOV
- Audio: estereo Izquierda / derecha
- Consumo: 3.5-5.5V, 60mA @ 5V
- Pan&Til: plástico de alto impacto, 15g, lente con anillo de bloqueo
- Imagen: ¼ "600TVL CMOS, NTSC
- Terminación cable: 5p Molex (IRC / Fat Shark conector TX, listo para conectar)

Transmisor 5,8 Ghz:

- Frecuencia: 5.8Ghz
- Potencia de transmisión: 250mW
- Tensión de entrada: 6 ~ 12V