Medium weight SIXcopter frame with 16mm tubes

Materials: Fiberglass G10/G11 1.7mm thick center boards, 1.0mm protective cage. Clear dome 0.2mm thick.

Size: <> 680mm motor to motor distance (diagonal) with 315mm arms.

Weight: <> 635g with carbon fiber arms (including motor mounts).

Recomended motors and propellers: frame is designed for medium motors and medium weight payload. 10-12" propellers with thrust up to 1.0kg/motor. You can use bigger propellers (12") but please don't exceed 1.0kg thrust per arm!

Remember that any motors and propellers should be ballanced before using it!

Included parts:

    - two black 1.7mm fiberglass main plates,
    - six motor mounts (standard size) with boom block,
    - protective black fiberglass cage parts (1mm),
    - power distribution board,
    - clear dome, some belcro for dome mounting,
    - zipties,
    - screws, nuts, washers, spacers etc

Short description: medium weight SIXcopter frame prepared for most popular controllers (see drawning bellow).

Materials: Fiberglass G10/G11 1.7mm thick center boards, 1.0mm protective cage. Clear dome 0.2mm thick.

Size: <> 680mm motor to motor distance (diagonal) with 315mm arms.

Weight: <> 635g with carbon fiber arms (including motor mounts).

 

The specifications and designs are subject to be changed without prior notice for futher improvement. 

Trademarks and product names used herein are for identification purposes only and may be trademarks of their respective companies.